Kolberg

Very flexible adapter for large structures with open holder for square tubes 20 mm, tubes Ø 20 resp. 16 mm. The square tubes can also be clamped on...

Multifunctional tilter, very solid designfor individual cymbalsfor continuous tambourine roll (pivot bearing)to mount e.g. transverse tubes in an i...

with adapter holder for Kolberg cymbale antique/crotales for instruments with rubber mounting-pieces (e.g. wood blocks, temple blocks, poly blocks...

rubber washer 260 GSpare part for:sliding holder 260, 260L, 260Sholder/pin 260Z, 260ZA, 260ZWholder/pin with angled holder 260VK, 260VK

Ø 10 x 100 mm with adapter holder for Kolberg cymbale antique/crotales for instruments with rubber mounting-pieces (e.g. wood blocks, temple block...

Kolberg 260S Sliding Holder Square 20mm Ø10x100mm

The combination of 260VL or 260VK with a U-shaped adjusting ring (115U, 116U) results in an open sliding holder, that can be mounted/dismounted fle...

The combination of holder/pin with a U-shaped adjusting ring (115U, 116U) results in an open sliding holder, that can be mounted/dismounted flexibl...

261; 6 cm fits instruments with rubber mounting-piece(e.g. wood blocks, temple blocks, poly blocks, cowbells/cencerros)guiroscencerros/cowbells wit...

262 12 cm is for instruments with rubber mounting-piece(e.g. wood blocks, temple blocks, poly blocks, cowbells/cencerros)guiroscencerros/cowbells w...

263; 18 cm, instruments with rubber mounting-piecee.g. wood blocks, temple blocks, poly blocks, cowbells/cencerros with holder Ø 10 mmTechnical dat...

264 inner Ø approx. 6 cmsheathed with rubber sleeveguide ring for tubular bells (only partly for use as damping ring)holder for e.g. guiro/reco-rec...

Multifunctional sliding holder with three-step adapter 265 is for instruments with rubber mounting-piece(e.g. wood blocks, temple blocks, poly bloc...

multifunctional three-step holder/pinThe combination of holder/pin 265Z und U-shaped adjusting ring 115U results in an open sliding holder 265, tha...

266; 8 cm; for power blocks cencerros/cowbells with holder Ø 16 mm concert bongos, concert tom-tomssliding holder; square 20 mm fits:basic holder 2...

Variants 267, 12 cm, power blockscencerros/cowbells with holder Ø 16 mmconcert bongos, concert tom-toms   Technical data sliding holder; square 20 ...

Permanent thumb roll, tuning, dampingFrom free sounding to muffled rhythmically articulate passages, with their adjustable tuning and damping knob ...

for freely suspended mounting (cross-shaped holder fitted with rubber bands) suitable for glissando gongs Ø 21 - 30 cm and Burmese gongs Ø 21 - 25...

Mallet holder (mallet rake) for up to 6 pairs of mallets. With rubberised bars to avoid disturbing noises. for shaft Ø 16 mm holder width: 35 cm Te...

Straight cymbal stand or...For combination with: mallet holder 280 for 6 pairs of mallets or mallet holder 281I for 10 pairs of mallets Combinatio...

Consisting of: Combination stand base, foldable 136 Insert tube 168 Adjusting ring 160 Trap tray for percussion, small, asymmetric adapter piece...

Consisting of: Combination stand base, foldable 136 Insert tube 168 Adjusting ring 160 Trap tray for percussion, small, asymmetric adapter piece...

Mallet holder (mallet rake) for up to 10 pairs of mallets. With rubberised bars to avoid disturbing noises. for shaft Ø 16 mm holder width: 60 cm T...

Holder for cow bells Ø 10 mm bell not included

incl. screwsFitting e.g.: Sliding holders 260, 261, 262, 263, 265 Holders/pins 260VK, 260VL, 260Z, 260ZA, 260ZW

Ø 16 mm / location hole Ø 10 mm   Fitting e.g.: Sliding holders 260, 261, 262, 263, 265 Holders/pins 260VK, 260VL, 260Z, 260ZA, 260ZW

location hole Ø 16 mmFitting e.g.: Sliding holders 266, 267, 268, 265 Holders/pins 260ZG

location hole Ø 10 mm   Fitting e.g..: Sliding holders 260, 261, 262, 263, 265 Holders/pins 260 VK, 260 VL, 260 Z, 260 ZA, 260 ZW

Dimensions: 100 x 100 cmPodium height: thanks to the special design of the four solid steel plugin legs with level adjustment, the podium can be se...

Additional set of four plug-in legs with level adjustment for podium

Dimensions: 100 x 100 cmPodium height: 22 cm by means of four plug-in legs with level adjustmentFrame and tread surface: very sturdy frame construc...

Dimensions: 100 x 100 cmPodium height: 22 cm by means of four plug-in legs with level adjustmentFrame and tread surface: very sturdy frame construc...

Additional step for conductor's podium 3026N (recommended from a basic height of 40 cm) Step surface: approx. 97 x 25 cmStep height: 19 cmConstruct...

3093 approx. 72 - 85 cmFluid height adjustment with clamping leverSeat shape: round, Ø = 30 cmSeat: non-swivelling due to keyway system, removableB...

NEW MODELThis light yet extremely sturdy model can be completely taken apart, allowing easy transportation in hand luggage with great space savings...

Seat heightThe standard height is either 48, 50 or 52 cm (other heights available on request).If necessary the seat frame height can be increased b...

Our advanced orchestra chair is unique among the chairs offered on the market. The height of this chair can be fluidly adjusted by as much as 5 cm ...

Kolberg Percussion proudly presents the further developed successor of top-of-the-line model 3100H.Users of our double-bass chairs are already fami...

3105 approx. 42 - 55 cm All "Comfort line" orchestra chairs feature pneumatic height adjustment. A safety pneumatic spring mechanism allows fluid, ...

3105H; approx. 50 - 70 cm All "Comfort line" orchestra chairs feature pneumatic height adjustment. A safety pneumatic spring mechanism allows fluid...

Seat height: 80 cm (fixed frame) Seat shape: standard F-shape or curved S-shape Seat adjustment: none Backrest adjustment: none Frame: steel tube c...

For orchestra chairs 3106, 3107, 3100, 3100H, 3100PHKThe seat frame height can be increased by 30, 40, 60 or 80 mm by simply adding on the appropri...

For orchestra chairs 3106, 3107, 3100, 3100H, 3100PHKThe seat frame height can be increased by 40 mm by simply adding on the appropriate extensions.

Seat height The standard height is either 48, 50 or 52 cm (other heights available on request). If necessary the seat frame height can be increased...

Back in 1973, the timpani/percussion chair 3110 was the first Kolberg chair to establish itself successfully in a symphony orchestra. This model of...

Back in 1973, the timpani/percussion chair 3110 was the first Kolberg chair to establish itself successfully in a symphony orchestra. This model of...

Back in 1973, the timpani/percussion chair 3110 was the first Kolberg chair to establish itself successfully in a symphony orchestra. This model of...