Kolberg Combination stands

Kolberg square Transverse tube 700mm square tube square 20 mm fitssliding holder 260 - 268clip-bolt adjusting ring 115, 115R, 115DU-shaped adjustin...

(cymbal top / shaft): 8.5 cm / 20 cm

For one cymbal, one trap tray, base to create a cymbal tree etc.Combination stand consisting of: combination stand base, foldable 136 insert tube ...

Very sturdy trap trays for mallets and small percussion. Material Plywood plate with wooden raised edges of solid beech wood on 2 resp. 3 sides. Co...

Consisting of: Combination stand base, foldable 136 Insert tube 166 Adjusting ring 160 Trap tray for percussion, small 230 Height: approx. 70 -...

Straight cymbal stand or...For combination with: mallet holder 280 for 6 pairs of mallets or mallet holder 281I for 10 pairs of mallets Combinatio...

holder square 20 mm fitsbasic holder 240, 240L, 240Stransverse tube 223 - 229-3, 122, 122Stransverse tube, T-shaped 114K, 114L, 114KS, 114LStransve...

insert hole Ø 7.5 mm fitstriangle holder 241, 242, 243holder/pin 260Z, 260ZA, 260ZWholder/pin with angled holder 260VL, 260VKadapter 265Ztambourine...

Kolberg 226 transverse tube square 20 mm diameter600mm long

Triangle holder with soft, wide leather cover for comfortable hand-held play, for suspension on the music stand bar or on the combination stand sys...

Adjusting ring/axial lock for round tubes Ø 16 mmadjusting ring 16 mm fitsinsert tube 164 - 169sliding holder 265 - 268adapter 265Zsnare drum stand...

The combination of 260VL or 260VK with a U-shaped adjusting ring (115U, 116U) results in an open sliding holder, that can be mounted/dismounted fle...

Length (cymbal top / shaft): 10 cm / 10 cmTechnical data cymbal top; 7.5 mm; rubber top for cymbals 161Acymbal sizzler 256mallet holder 280 - 281cy...

Multifunctional tilter, very solid designfor individual cymbalsfor continuous tambourine roll (pivot bearing)to mount e.g. transverse tubes in an i...

Combination example from our range: Combination stand for 5 power blocks 1470-5XLS Combination stand for 4 poly/wood blocks 1470-4KS Lithophone/s...

Very sturdy trap trays for mallets and small percussion.MaterialPlywood plate with wooden raised edges of solid beech wood on 2 resp. 3 sides.Conta...

Height-adjustable mobile stand for up to 4 tubular bells Base: very sturdy folding stand with large base manual damping for 4 tubular bells infini...

Transverse tubes 223 feature an additional insert tube Ø 10 mm. The fixing screw is flexibly mounted where needed (no side noises caused by loose f...

Supporting bar for triangle.As universal holder also suitable for wood blocks, cowbells etc. triangle holder7.5 mm fits:basic holder 240sliding hol...

Combination stand with wide base, consisting of combination stand base, foldable 130 main tube 204 adjusting ring 200 insert tube 166 adjustin...

Length Ø 16 mm(without cymbal stacker) 40 cm Cymbal stacker  yes Technical data tip Ø 7.5 mmrubber top for cymbals 161Acymbal stacker 161, 162cymba...

Kolberg WING BOLT/THREADED HOOK M6 x 16mm

Twin clip-bolt adjusting ring for mounting of tuned gongs, tam-tams, tubular bells, thunder sheets, bells etc.115D is twin clip-bolt (separate fixi...

261; 6 cm fits instruments with rubber mounting-piece(e.g. wood blocks, temple blocks, poly blocks, cowbells/cencerros)guiroscencerros/cowbells wit...

Multi-functional twin adjusting ring for the connection of square tubes 20 mm, 25 mm and 30 mm, adapter for the combination stand system 300 series...

The combination of holder/pin with a U-shaped adjusting ring (115U, 116U) results in an open sliding holder, that can be mounted/dismounted flexibl...

266; 8 cm; for power blocks cencerros/cowbells with holder Ø 16 mm concert bongos, concert tom-tomssliding holder; square 20 mm fits:basic holder 2...

Ø 10 x 100 mm with adapter holder for Kolberg cymbale antique/crotales for instruments with rubber mounting-pieces (e.g. wood blocks, temple block...

Sturdy folding stand with holder for 1 pair of concert cymbals up to 22"/56 cm Completely dismountable Infinitely height-adjustable Very sturdy hol...

Combination stand for set of car horns Gershwin "An American in Paris" 1190 Consisting of: combination stand base 134 adjusting ring 160 insert t...

T-shaped transverse tube; square 20 mm fits:angled insert tube 113twin clip-bolt adjusting ring 115Dclip-bolt adjusting ring 115, 115S, 115Rtwin ad...

CYMBAL STACKER Ø 16 X 100 MM FOR 2 CYMBALSLength (cymbal top / shaft): 10 cm / 10 cm, upper cymbal adapter 30° angled (suitable for splash cymbals ...

220RT 10 cm 1 RotoTomholder 16 mm fits: insert tube 164 - 168; sliding holder 265 - 268; tilter 253Combination examples from our range: Combination...

Very sturdy holders for concert cymbals, with tray for e.g. mallets and small percussion.Support bracketsThe support brackets are covered with high...

Very sturdy holders for concert cymbals, with tray for e.g. mallets and small percussion. Support bracketsThe support brackets are covered with hig...

Very sturdy trap trays for mallets and small percussion.MaterialPlywood plate with wooden raised edges of solid beech wood on 2 sides.Contact surfa...

Height-adjustable mobile stand for 1 tam-tam up to Ø 85 cm. Infinitely height-adjustable approx. 120 - 205 cm 3 fully locking swivel casters Ø 75 m...

168; 80 cm; can stack cymbals tip Ø 7.5 mm fits:rubber top for cymbals 161Acymbal stacker 161, 162cymbal sizzler 256mallet holder 280, 280E, 281Iti...

Triangle holder with soft, wide leather cover for comfortable hand-held play, for suspension on the music stand bar or on the combination stand sys...

Very sturdy trap trays for mallets and small percussion. MaterialPlywood plate with wooden raised edges of solid beech wood on 2 resp. 3 sides.Cont...

Permanent thumb roll, tuning, dampingFrom free sounding to muffled rhythmically articulate passages, with their adjustable tuning and damping knob ...

Variants 267, 12 cm, power blockscencerros/cowbells with holder Ø 16 mmconcert bongos, concert tom-toms   Technical data sliding holder; square 20 ...

Technical data tip Ø 7.5 mm rubber top for cymbals 161Acymbal stacker 161, 162cymbal sizzler 256mallet holder 280, 280E, 281Itilter 253insert tube ...

Transverse tube 224 features an additional insert tube Ø 10 mm and Ø 7.5 mm. The fixing screw is flexibly mounted where needed (no side noises caus...

Twin adjusting ring for the connection of square tubes 20 mm, round tubes Ø 16 mm and round tubes Ø 20 mm. Round tubes Ø 20 mm can also be clamped ...

Sturdy, light-weight folding stand136; 60 cm; for trap tray, cymbal standvertical tubeØ 16mmBase for: insert tube 164 - 169snare-drum stand upper p...

incl. screwsFitting e.g.: Sliding holders 260, 261, 262, 263, 265 Holders/pins 260VK, 260VL, 260Z, 260ZA, 260ZW

with adapter holder for Kolberg cymbale antique/crotales for instruments with rubber mounting-pieces (e.g. wood blocks, temple blocks, poly blocks...