Kolberg

Padded cover made of heavy-duty synthetic fibre for Kolberg glockenspiel 2426GS   Colour: black

Accurately fitting cover plate for Kolberg glockenspiel 2426GS made of laminated birchwood with a finish of synthetic resin; for the protection of ...

Supporting bar for triangleThe new version of the well-known and proven triangle holder 242 optimises the sound of the instrument. Thanks to an inn...

Aluminium resonators 5 octave range from C to c4 (C2-C7) Bars made from Honduran rosewood, width from 83 to 45 mm Height adjustable from 86 to 106...

Brass resonators (with aluminium resonators see 2445A) 5 octave range from C to c4 (C2-C7) Bars made from Honduran rosewood, width from 83 to 45 m...

Set of 8 bags for C-marimba "Avantgarde" 2445A with aluminium resonators.

A reclined version of the "International" tubular bell set, specially developed for virtuoso playing such as in the opera "Saint François d'Assise"...

Triangle clamp-on holder for music stand bar or trap tray. 

Triangle holder with soft, wide leather cover for comfortable hand-held play, for suspension on the music stand bar or on the combination stand sys...

Triangle holder with soft, wide leather cover for comfortable hand-held play, for suspension on the music stand bar or on the combination stand sys...

This device allows for play with excellent sound even when fast multi-percussion passages make it impossible to change the beater. The instrument i...

bars made of Rosewood or glass fibre reinforced plastic very compact, sturdy design easy transport, "folding xylophone" Range f1 - c5 (3.5 Octaves...

foldable, sturdy "X"-stand with central height adjustment 78 to 90 cm easy to transport fully locking swivel casters Ø 75 mm for glockenspiel 2420...

student instrument bars made of Rosewood very compact, sturdy design Range c2 - f4 (2.5 octaves), international C5 - F7Pitch 443 Hz (other pitches...

bars made of Rosewood or glass fibre reinforced plastic accidental keys that can be raised and lowered tube resonators central height-adjustment s...

Transport case without casters for folded Kolberg xylophone 2495Exterior dimensions (height x width x depth): c. 34 x 140 x 70 cmMaterial Thick pad...

bars made of Rosewood or glass fibre reinforced plastic accidental keys that can be raised and lowered tube resonators central height-adjustment v...

Padded cover made of heavy-duty synthetic fibre for Kolberg xylophone 2495 or 2495GSColour: black

Very flexible adapter for large structures with open holder for square tubes 20 mm, tubes Ø 20 resp. 16 mm. The square tubes can also be clamped on...

Multifunctional tilter, very solid designfor individual cymbalsfor continuous tambourine roll (pivot bearing)to mount e.g. transverse tubes in an i...

with adapter holder for Kolberg cymbale antique/crotales for instruments with rubber mounting-pieces (e.g. wood blocks, temple blocks, poly blocks...

rubber washer 260 GSpare part for:sliding holder 260, 260L, 260Sholder/pin 260Z, 260ZA, 260ZWholder/pin with angled holder 260VK, 260VK

Ø 10 x 100 mm with adapter holder for Kolberg cymbale antique/crotales for instruments with rubber mounting-pieces (e.g. wood blocks, temple block...

Kolberg 260S Sliding Holder Square 20mm Ø10x100mm

The combination of 260VL or 260VK with a U-shaped adjusting ring (115U, 116U) results in an open sliding holder, that can be mounted/dismounted fle...

261; 6 cm fits instruments with rubber mounting-piece(e.g. wood blocks, temple blocks, poly blocks, cowbells/cencerros)guiroscencerros/cowbells wit...

262 12 cm is for instruments with rubber mounting-piece(e.g. wood blocks, temple blocks, poly blocks, cowbells/cencerros)guiroscencerros/cowbells w...

263; 18 cm, instruments with rubber mounting-piecee.g. wood blocks, temple blocks, poly blocks, cowbells/cencerros with holder Ø 10 mmTechnical dat...

264 inner Ø approx. 6 cmsheathed with rubber sleeveguide ring for tubular bells (only partly for use as damping ring)holder for e.g. guiro/reco-rec...

Multifunctional sliding holder with three-step adapter 265 is for instruments with rubber mounting-piece(e.g. wood blocks, temple blocks, poly bloc...

multifunctional three-step holder/pinThe combination of holder/pin 265Z und U-shaped adjusting ring 115U results in an open sliding holder 265, tha...

266; 8 cm; for power blocks cencerros/cowbells with holder Ø 16 mm concert bongos, concert tom-tomssliding holder; square 20 mm fits:basic holder 2...

Variants 267, 12 cm, power blockscencerros/cowbells with holder Ø 16 mmconcert bongos, concert tom-toms   Technical data sliding holder; square 20 ...

Permanent thumb roll, tuning, dampingFrom free sounding to muffled rhythmically articulate passages, with their adjustable tuning and damping knob ...

for freely suspended mounting (cross-shaped holder fitted with rubber bands) suitable for glissando gongs Ø 21 - 30 cm and Burmese gongs Ø 21 - 25...

Mallet holder (mallet rake) for up to 6 pairs of mallets. With rubberised bars to avoid disturbing noises. for shaft Ø 16 mm holder width: 35 cm Te...

Straight cymbal stand or...For combination with: mallet holder 280 for 6 pairs of mallets or mallet holder 281I for 10 pairs of mallets Combinatio...

Consisting of: Combination stand base, foldable 136 Insert tube 168 Adjusting ring 160 Trap tray for percussion, small, asymmetric adapter piece...

Consisting of: Combination stand base, foldable 136 Insert tube 168 Adjusting ring 160 Trap tray for percussion, small, asymmetric adapter piece...

Mallet holder (mallet rake) for up to 10 pairs of mallets. With rubberised bars to avoid disturbing noises. for shaft Ø 16 mm holder width: 60 cm T...

Holder for cow bells Ø 10 mm bell not included

incl. screwsFitting e.g.: Sliding holders 260, 261, 262, 263, 265 Holders/pins 260VK, 260VL, 260Z, 260ZA, 260ZW

location hole Ø 16 mmFitting e.g.: Sliding holders 266, 267, 268, 265 Holders/pins 260ZG

Dimensions: 100 x 100 cmPodium height: thanks to the special design of the four solid steel plugin legs with level adjustment, the podium can be se...

Additional set of four plug-in legs with level adjustment for podium

Dimensions: 100 x 100 cmPodium height: 22 cm by means of four plug-in legs with level adjustmentFrame and tread surface: very sturdy frame construc...

Dimensions: 100 x 100 cmPodium height: 22 cm by means of four plug-in legs with level adjustmentFrame and tread surface: very sturdy frame construc...

Additional step for conductor's podium 3026N (recommended from a basic height of 40 cm) Step surface: approx. 97 x 25 cmStep height: 19 cmConstruct...