yamaha

The DTX8 series comes equipped with the DTX-PRO module that possesses the same tone generator as the DTX-PROX module. The birch shells are painted ...

Faithfully reproduces real drum sounds and real-room ambience recorded in world renowned studiosAMBIENCE, COMP, and EFFECT Kit Modifier knobs that ...

Double-braced stand for DTX-MULTI 12 and DTX modulesAn exceptionally stable stand for the DTX-MULTI 12. (PS940 requires MAT1 for mounting MAT1)

<iframe width="560" height="315" src="https://www.youtube.com/embed/LpmhZAC37lQ?si=7tZkcKyrhDvVsiUz" title="YouTube video player" frameborder="0...

This kick pad has a durable, rubber material on the bass drum head for excellent feel and quietness and adopts the Yamaha three-layer cushion struc...

Yamaha Electronic Cymbal Pad PCY90

The DTX10 Series is the flagship of the DTX lineup, combining the functionality of electronic drums with the sheer beauty of their acoustic counter...

An extremely quiet Hi-hat controller. You can combine this controller with an electronic drum pad such as the TP65S (sold separately) to create a c...

With the FGDP-30 Finger Drum Pads, anyone can drum, anywhere, at any time. With ergonomic pads and loaded with a wide range of samples, along with ...

THE ULTIMATE FINGER DRUM PADWith ultra-sensitive Pads in an ergonomic layout perfect for finger drumming, the FGDP features a Tone Generator, inter...

Frame Structure :This Yamaha original design incorporates a sub-frame just below the rocker shaft to deliver greater stability and durability.Drumm...

Double Chain Drive ModelQuick Adjusting CamAxle Stabilizing Bearing ChamberLow Profile Stabilizing HingeEasy Access Auto Lock Spring AdjustmentWeig...

Yamaha FP9D Professional Single Bass Drum Pedal, Direct Drive w/Case The Yamaha FP9D is a direct-drive, single kick-drum pedal. Designed for pro s...

Double-braced 600 Series Hardware SetAll stand legs in this set feature exceptionally stable double-braced construction. The hardware itself may be...

Yamaha Heavy Drum Throne DS840

This clamp attaches a tom clamp (CL945B, etc.) or cymbal holder (CH755, etc.) to the hex-shaped pipe and is compatible with 22.2mm diameter pipes.I...

Yamaha HHS3 ultra light hi-hat stand

The locking nut eliminates looseness and slippage. The top hi-hat cymbal secures with a tuning key.

Toggle link and 2 double braced legs.New Hi-hat ClutchLonger Rod for higher setting is includedCymbal Angle Adjustment with Self LockSpring Tension...

Light weight, 3 single braced legs (Pedal side legs open 120°), height adjustable from 65-90cm

The Yamaha HS740A Hi-Hat Stand is a durable, affordable hi hat stand with professional features such as spring tension adjustment and rotating legs...

Chain-linked, 3 double braced rotating legs, 11-step tension adjustable.

Standard hi-hat clutch.

Direct Link, 2 Double-braced Legs, 80-92cm Height Range.• Hi-hat Clutch• Longer rod for higher setting is included• Cymbal angle adjustment with se...

Several clamps for securing tubes of different thickness (φ”15 –φ”34, including hexagonal tubes) are connected to the extended arm. These clamps ca...

The cross clamp is used to connect two hexagonal tubes at 90-degree angles (for example, to connect a leg tube with a tube that has been horizontal...

Designed in close collaboration with Keiko Abe, her Signature Series Mallets are designed to draw out the most from both the performer’s technique ...

Designed in close collaboration with Keiko Abe, her Signature Series Mallets are designed to draw out the most from both the performer’s technique ...

Designed in close collaboration with Keiko Abe, her Signature Series Mallets are designed to draw out the most from both the performer’s technique ...

Designed in close collaboration with Keiko Abe, her Signature Series Mallets are designed to draw out the most from both the performer’s technique ...

Designed in close collaboration with Keiko Abe, her Signature Series Mallets are designed to draw out the most from both the performer’s technique ...

The KU100 is a silent kick unit that can sense your playing dynamics. This unit is designed to reduce the physical sound of playing the bass drum a...

It's Time to Ascend to the Throne!This lightweight single-brace drum throne is a perfect complement to any acoustic or electronic drum kit.Yamaha D...

Clamp for DTX-MULTI 12, DTX900, DTX700 and DTXtreme III drum trigger modules

seat size: Round Seat Design 300mm (Diameter) seat mount: AL Die-cast Seat Mount Legs: 3 Single Braced Legs adjustment: Clamp Rod Type (430-650mm) 

The MS45DR is a 2.1-channel electronic drum monitor system for home use. This simple and compact unit is specially designed to authenticly reproduc...

The Yamaha HXOCII Rack System Open Clamp is used to attach tubes with a diameter of 15-34mm, (including hexagonal tubes) to the hexagonal tube. HEX...

A large 10-inch cymbal pad with attachment to rack system. Newly designed for more natural feel and quietness, you will notice the difference from ...

Yamaha FPDS2A Drum Pedal And Throne Package Includes FP6110 pedal and DS550 drum throne Belt-Drive kick-drum Pedal Single-braced Drum Throne Lightw...

Size: 14X5.5"Shell: BrassConstruction: 1.2mmBearing edge: 45°Hoops: 2.3mm triple flangedLugs: 10Finish: N/A

Size: 14X5.5"Shell: AluminumConstruction: 1.2mmBearing edge: 45°Hoops: 3mm die-castLugs: 10Finish: N/A

Size: 14X6.5"Shell: BrassConstruction: 1.2mmBearing edge: 45°Hoops: 2.3mm triple flangedLugs: 10Finish: N/A

Size: 13X6.5"Shell: BrassConstruction: 1.2mmBearing edge: 45°Hoops: 2.3mm triple-flangedLugs: 10Finish: N/A

Size: 14X5.5"Shell: BirchConstruction: 6-plyBearing edge: 30°Hoops: 1.6mm triple-flangedLugs: 10Finish: Solid Black

The new addition of the metal snare lineup to the Recording Custom series represents the addition of Yamaha’s finest snare drums, using Steve Gadd’...

Size: 14X5.5"Shell: SteelConstruction: 1.2mmBearing edge: 45°Hoops: 2.3mm triple-flangedLugs: 10Finish: N/A