Hardware and accesories

Padded bags for tambourines, made of synthetic fibre.The bag is provided with a grip strap and a sewn-on outside pocket for accessories, like for e...

The DWSM379 is a standard hi-hat clutch by Drum Workshop (DW). This component comes as standard on all DW hi-hat stands, fitting a 7mm rod. It allo...

insert hole Ø 7.5 mm fitstriangle holder 241, 242, 243holder/pin 260Z, 260ZA, 260ZWholder/pin with angled holder 260VL, 260VKadapter 265Ztambourine...

Kolberg 226 transverse tube square 20 mm diameter600mm long

Shaped cymbal handles with interior padding made from high-quality, soft leather.Cymbal not included

Adjusting ring/axial lock for round tubes Ø 16 mmadjusting ring 16 mm fitsinsert tube 164 - 169sliding holder 265 - 268adapter 265Zsnare drum stand...

The combination of 260VL or 260VK with a U-shaped adjusting ring (115U, 116U) results in an open sliding holder, that can be mounted/dismounted fle...

Available with soft rubber for quiet practice. Features a non-skid rubber base and an 8mm. mounting thread for use on a cymbal stand.

These Canadian-made practice pads feature a hefty gum rubber playing surface, Baltic birch wood base, and 8mm brass thread for easy mounting.

The POWERPAD Designer compact-sized hardware bag can conveniently store up to 4 stands. It comes equipped with a shoulder strap and handle making i...

Hook to hook measures 6cm over all length

This dual-sided practice pad features surfaces that are softer and thicker in nature than most practice pads on the market. The ¾ inch Flexx surfac...

The Gibraltar Floor Tom Rubber Feet are designed as replacement feet in the event you lose one from your floor tom leg, or may need an upgrade.Size...

The Gibraltar SC-MCW 8mm Metal Cymbal Stand Washer sits on an 8mm cymbal post to support cymbal felts and cymbals.

The Gibraltar SC-HR1 Hi Hat Stand Rubber Seat sits on the hi hat stand cup, while supporting and protecting the bottom hi hat cymbal.Being made of ...

A 6.5mm replacement hi hat pull rod.The hi hat pull rod is 23" long, with metric m6 thread and 1.00 thread pitch.

The Deluxe Classic Snare Drum Throw Off is a cast metal classic style strainer with mounting hardware. Size 1.7(h) x 4(w) x 6.75(l) inches Weight 0.54

Gibraltar's handy SC-4248 Speed Key installs and removes tension rods with lightning speed without ever having to remove your hand from the key.Tun...

Size: 14" Lugs: 10 For: Snare Side Material: Steel

Triple-flanged heavy-duty 2.3mm chrome drum hoops for studio and stage.

The Gibraltar SC-0129 6mm Key Screw locks the U joint of a double pedal connector rod to the master and slave pedal beater axle of a doube bass dru...

The Gibraltar SC-4795-1 checks every box on your cowbell mount wish list. It's affordable, durable, nonslip, and most importantly, it lets you inco...

These durable plastic locks fit over tension rods to prevent drums from detuning while being played.Size 0.09(h) x 4(w) x 4(l) inchesWeight 0.02

A 1.5" standard black rack clamp with S hookConnect two of these clamps to a 1.5" cross bar and hang gongs of all sizes

A Book of Contemporary Drumset ConceptsDrumset Book & Online AudioAt long last, the secrets of David Garibaldi's groundbreaking funk/jazz fusio...

Evans SoundOff Mutes significantly reduce volume while you practice on your traditional drum set. SoundOff Mutes provide excellent stick response a...

EVANS 14" Orchestral Staccato Coated Snare batter drumhead caters to both professionals and students, featuring a single ply of 7.5mil film that of...

Like original Heavyweights, Heavyweight Dry snare batters have excellent durability and a compressed attack, but add UV-coating to further increase...

The EVANS E-Ring is an easy-to-use external overtone control ring for drumheads that floats on the surface of a drumhead to remove overtones and fl...

The EVANS E-Ring is an easy-to-use external overtone control ring for drumheads that floats on the surface of a drumhead to remove overtones and fl...

The E-Ring is an easy-to use external overtone control ring which "floats" on the surface of a drum head. It removes overtones and flattens the dru...

Discover a world of drumming possibilities with our extensive range of high-quality aftermarket drum parts. Elevate your sound, find the perfect fi...

For over 50 years, DW has been the worldwide leader in hardware innovation. Every DW product launch has been followed with tireless innovation and ...

CYMPAD Chromatic cymbal washers come in a wide selection of color options that allow drummers to contrast, compliment and customize the look of the...

The t-TAB is a drumhead tone modifier that makes it easy to "fine tune" the tone and resonance of any drum, in any room, for any playing situation....

Construction: 1-ply, vented muffle ring, small power dotThickness: 10mil Finish: CoatedA texture coated head with a unique "vented" muffling ring a...

BFSD “Steve's Donut” gives you Medium Beefy Thud Snare & Toms with the feel of your actual batter head. (Center Circle Cutout for Snare Batter ...

BFSD “Steve's Donut” gives you Medium Beefy Thud Snare & Toms with the feel of your actual batter head. (Center Circle Cutout for Snare Batter ...

Levy’s polyester drumstick bag. 14″ L X 17″ W. Four internal stick sleeves and one external sleeve with hook-and-loop closure Designed by Levy’s i...

The RecPlate can be mounted onto a cymbal topper at the center for most applications, or at both ends for more stability when hanging heavier instr...

Instantly Transform The Sound Of Your Drums…… The BFSD was engineered to effortlessly transform any Drum into your very own Vintage, Beefy, Thumpy ...

NEW patent pending snare muffler design. Higher quality leather, better logo and hinged design of the large muffler makes these more versatile alto...

The Pearl D-3000TC is a professional grade timpani throne that accommodates a wide range of player heights and comfort positions; providing a new s...

This adjustable vintage style cymbal fizzler gives you the rich sound of a riveted cymbal without having to drill any holes into your cymbals. It’s...

Very stable frame construction made of solid wood and multi-glued beech plywood with integrated, replaceable spiked board; including a set of 4 plu...

Seat height: fluid height adjustment via pneumatic adjustment mechanism with release leverapprox. 58 - 84 cmapprox. 70 - 96 cm with extension taper...

For orchestra chairs 3106, 3107, 3100, 3100H, 3100PHKThe seat frame height can be increased by 40 mm by simply adding on the appropriate extensions.

Our advanced orchestra chair is unique among the chairs offered on the market. The height of this chair can be fluidly adjusted by as much as 5 cm ...