Hardware accessories

Triple-flanged heavy-duty 2.3mm chrome drum hoops for studio and stage.These hoops provide consistent shape, tension, tuning and a clear, open sound.

Triple Flange 14 Inch Diameter 8 hole

The Gibraltar SC-0129 6mm Key Screw locks the U joint of a double pedal connector rod to the master and slave pedal beater axle of a doube bass dru...

Gibraltar Floor Tom Legs are 21" long and are available in 3 different sizes which will work with almost every drum brand.

The legendary redesigned Power Disk Kick Pad, Impact Pad, with optional intelligent tonality kick drum enhancer to fully awaken any kick drum.Prote...

32 feet of genuine Musser Green Bar Cord. This is used on a wide range of keyboard instruments like marimba, xylophone, and vibraphone. This is wha...

Tama HP932 Bolt Spring Washer Spacer & Nut Assembly

The Pearl SM012 Hi-Hat replacement rod is designed to fit most current model Pearl Hi Hat Stands. The length is 21" and width 7mm.

The classic Ludwig spurs are available again.  These are currently used on the modern Club Date and Legacy series drums.  But they work with the ol...

The EVANS E-Ring is an easy-to-use external overtone control ring for drumheads that floats on the surface of a drumhead to remove overtones and fl...

Chrome plated drum tuning key features die-cast construction, Pearl logo, and balance beads on each side of the wide T-handle for better grip and c...

The Sound Values™ clip is molded from impact-resistant plastic and features a single nodal suspension cord. This economical clip is sturdy, durable...

Block style rubber feet for the T-Leg section of a drum rack.The Gibraltar Flat Rubber Drum Rack Feet slide onto the end of any 1.5" drum rack bar ...

Original Yamaha parts for your cymbals stands. 8mm thread.

Male T-Handle 5/16-18 thread x 3/4" long wing bolt used on various Ludwig hardware, primarily the P1216D bass drum bracket

The Gibraltar SC-CH Bass Drum Claw Hook is a universal claw hook for wood bass drum hoops.size: 1.5(h) x 3.75(w) x 4.5(l) inches

Gibraltar's Bass Drum Riser elevates an 18-inch or 20-inch kick drum two inches off the floor.It allows optimal alignment with your pedal beater.

Custom designed snare side die-cast hoops feature reinforced tension points, large snare gates, and highly polished chrome finish.Slightly oversize...

for YAMAHA FP720, FP710, FP701, Camco, Pearl P-880,P-850 etc…（Bearing mounting section need to be models which provide 4mm ISO standard.）

Gretsch G4820V vintage diamond plate floor tom bracket in chrome finish. These will retrofit older kits. This bracket holds 9.5mm (or 3/8") tom leg...

A heavy-duty double-braced base designed for Gibraltar 9000 Series thrones, offering stability and support for any player.The B9608 Double Braced D...

If your Pearl SP-20 bass drum spur is missing its rubber tips, these will replace your missing or battered parts. Just slide them onto the spurs an...

The MEINL Cymbal Stackers enable a space saving set up of various cymbals on top of each other. Long version Knurled surface

For transforming a 16" floor tom into a bass drumSet includes: 2 Feet and 1 baseplateOptional: Optimount 15-16 tom mount Leg thickness: 10 mm

Pearl hi-hat lower cymbal holder. made of durable plastic adjustable angle of the lower cymbal fits, among others, Eliminator series tripods socket...

The PDP PDAXWH1410C wood hoops might change the way you relate to your snare drum.They offer a sound and feel that has to be experienced to believe...

Remo Quicktech Drumkey

The MEINL Guiro Holder firmly attaches to any common rod and holds the guiro securely in place while it is played.Features: Rubber pads against scr...

Restores brilliant sheen to your cymbals. Environmentally friendly pH balanced liquid designed for use with all SABIAN cymbals and series, whether ...

The MEINL Percussion Tables are made from durable materials and offer enough room for all common hand percussion instruments. It can be attached to...

Durable, quality leather straps ensure comfort and control when playing hand cymbals.

Replacement butt plate for Supraphonic, Acrolite and many other Ludwig snare drums. Comes with mounting hardware. Hole spacing is 2 1/8 Inches cent...

Chrome double-ended lug for Supraphonic beaded metal snare shell. Gasket and mounting screws included.  Fits various Ludwig USA snares Hole spacing...

This Ludwig 14″ Hoop is die-cast, giving your drum a higher tuning range, a louder stick knock, and a greater ability to lock in without detuning c...

Ludwig Die-Cast Hoop 14in 10-lug - brass plated

The Gibraltar SC-PC07 Large Rubber Cymbal / Drum Stand Feet work have a leg opening dimension of 3/4" x 5/16".

34" height — ideal for standing performancesHeight adjustable via the attached cordsMade from lightweight, organic beechwoodMatte lacquer finish of...

Use the RWH10 to mount Tama's RW100, RW105, or RW200 models of the Rhythm Watch drum metronome.Features: Simple and compact design Can work with TA...

Kolberg square Transverse tube 700mm square tube square 20 mm fitssliding holder 260 - 268clip-bolt adjusting ring 115, 115R, 115DU-shaped adjustin...

(cymbal top / shaft): 8.5 cm / 20 cm

For one cymbal, one trap tray, base to create a cymbal tree etc.Combination stand consisting of: combination stand base, foldable 136 insert tube ...

Length (cymbal top / shaft): 10 cm / 10 cmTechnical data cymbal top; 7.5 mm; rubber top for cymbals 161Acymbal sizzler 256mallet holder 280 - 281cy...

This is a 16-wire set of 14" replacement snare wires designed with the snap and sharp rattle needed to help your 14" snare cut through the mix. Fit...

The Gibraltar Ball L-Rod will fit any of the Gibraltar L-Rod platforms and in many manufacturers' original tom mounting systems.

The Gibraltar SC-HR1 Hi Hat Stand Rubber Seat sits on the hi hat stand cup, while supporting and protecting the bottom hi hat cymbal.Being made of ...

The SC-CLF/4 Hi Hat Clutch Felts fit on the threaded stem of a hi hat clutch, and protects the upper hi hat cymbal from contact with the metal nuts...

Use this rubber protector to help prevent your bass drum pedal clamp from scratching or marring your bass drum hoop.Size 0.18(h) x 4(w) x 5.25(l) i...

Make sure your drums are tuned and ready to go.These 1-3/8" (35mm) tension rods with 7/32" 24 threads are designed to fit with piccolo snare drums ...