Hardware accessories

Two head protective covers, lacquered plywood with protective padding for safe transport. Can be swiftly and easily attached to the wing screws by ...

Padded cover made of heavy-duty synthetic fibre for Kolberg bass drumColour: black

Permanent thumb roll, tuning, dampingFrom free sounding to muffled rhythmically articulate passages, with their adjustable tuning and damping knob ...

This device allows for play with excellent sound even when fast multi-percussion passages make it impossible to change the beater. The instrument i...

For timpani/percussion stool 3117 and timpani/percussion chair 3117SLhigh-gloss chrome-plated, fluid height adjustment, swivelling, removable

Kolberg 970-16 felt sheet approx. 500 x 450mm

Sturdy, light-weight folding stand134; 40 cm; for trap tray, lowvertical tube; 16 mm: insert tube 164 - 169snare-drum stand upper part 140, 140Etil...

Padded cover made of heavy-duty synthetic fibre for Kolberg bass drumColour: black

220RT 10 cm 1 RotoTomholder 16 mm fits: insert tube 164 - 168; sliding holder 265 - 268; tilter 253Combination examples from our range: Combination...

For orchestra chairs 3106, 3107, 3100, 3100H, 3100PHKThe seat frame height can be increased by 30, 40, 60 or 80 mm by simply adding on the appropri...

Very sturdy holders for concert cymbals, with tray for e.g. mallets and small percussion.Support bracketsThe support brackets are covered with high...

230GAM; large; asymmetric + centred; 45 x 60 cm; 2 sides openVery sturdy trap trays for mallets and small percussion.MaterialPlywood plate with woo...

Kolberg wire-wound snares for snare drum 14in

Combination stand consisting of combination stand base, foldable 134 insert tube 164 adjusting ring 160 2 x cymbal stacker 161 cymbals not incl...

Timpani pad for warm up, practicing, work out Feels like playing the timpani - the rebound is comparable to that of a timpano pitched in "d" Due to...

holder square 20 mm fitsbasic holder 240, 240L, 240Stransverse tube 223 - 229-3, 122, 122Stransverse tube, T-shaped 114K, 114L, 114KS, 114LStransve...

Supporting bar for triangle.As universal holder also suitable for wood blocks, cowbells etc.triangle holder7.5 mm fits:basic holder 240sliding hold...

transverse tube square 20 mm,built into combinations with:twin adjusting ring 221L, 221R, 117, 117WU-shaped adjusting ring/adapter 115USU-shaped ad...

for mobile combination stands based on 120without insert holeslength: 150 cmTechnical datatransverse tube square 20 mm, built into combinations wit...

main tube Ø 20 mm,fits combinations with:adapter 251, 252insert tube 164 - 169combination stand swivelling upper part 142twin adjusting ring 117, 1...

for mobile combination stands based on 120 without insert holes 229M4; 200 cmTechnical datatransverse tube square 20 mm,built into combinations w...

168; 80 cm; can stack cymbalstip Ø 7.5 mm fits:rubber top for cymbals 161Acymbal stacker 161, 162cymbal sizzler 256mallet holder 280, 280E, 281Itil...

Padded bags for tambourines, made of synthetic fibre.The bag is provided with a grip strap and a sewn-on outside pocket for accessories, like for e...

Kolberg rosin powderfor Kolberg Tambourines

Kolberg gut snares for drum

Mallet holder (mallet rake) for up to 6 pairs of mallets. With rubberised bars to avoid disturbing noises.for shaft Ø 16 mmholder width: 35 cmTechn...

Very stable hand straps made from high-quality, soft leather

Kolberg WING BOLT M8 X 20 mm

padded black triangle bag made of hard-wearing synthetic fibre with compartmentsSizefits two Kolberg triangles up to 21 cmMaterialhard-wearing synt...

Table stand consisting of    Combination stand base, foldable 136    Insert tube 166    Adjusting ring 160    Trap tray aluminium, large 231GHeight...

Kolberg square Transverse tube 700mmsquare tube square 20 mm fitssliding holder 260 - 268clip-bolt adjusting ring 115, 115R, 115DU-shaped adjusting...

Supporting bar for triangleThe new version of the well-known and proven triangle holder 242 optimises the sound of the instrument. Thanks to an inn...

insert hole Ø 7.5 mm fitstriangle holder 241, 242, 243holder/pin 260Z, 260ZA, 260ZWholder/pin with angled holder 260VL, 260VKadapter 265Ztambourine...

Transverse tube 224 features an additional insert tube Ø 10 mm and Ø 7.5 mm. The fixing screw is flexibly mounted where needed (no side noises caus...

264 inner Ø approx. 6 cmsheathed with rubber sleeveguide ring for tubular bells (only partly for use as damping ring)holder for e.g. guiro/reco-rec...

Twin adjusting ring for the connection of square tubes 20 mm, round tubes Ø 16 mm and round tubes Ø 20 mm. Round tubes Ø 20 mm can also be clamped ...

(cymbal top / shaft): 8.5 cm / 20 cm

Sturdy, light-weight folding stand136; 60 cm; for trap tray, cymbal standvertical tubeØ 16mmBase for: insert tube 164 - 169snare-drum stand upper p...

location hole Ø 16 mmFitting e.g.: Sliding holders 266, 267, 268, 265 Holders/pins 260ZG

Kolberg 260S Sliding Holder Square 20mm Ø10x100mm

Length Ø 16 mm(without cymbal stacker)40 cmCymbal stacker yesTechnical datatip Ø 7.5 mmrubber top for cymbals 161Acymbal stacker 161, 162cymbal siz...

Kolberg 226 transverse tube square20 mm diameter600mm long

Triangle holder with soft, wide leather cover for comfortable hand-held play, for suspension on the music stand bar or on the combination stand sys...

Trap tray consisting of Combination stand base, foldable 136 Insert tube 166 Adjusting ring 160 Trap tray for percussion, large 230G Height: ap...

Shaped cymbal handles with interior padding made from high-quality, soft leather.Cymbal not included

Adjusting ring/axial lock for round tubes Ø 16 mmadjusting ring 16 mm fitsinsert tube 164 - 169sliding holder 265 - 268adapter 265Zsnare drum stand...

Clip-bolt adjusting ring for the safe suspension of percussion instruments, like e.g. tam-tams, thundersheets, tuned gongs, bells etc.The clip-bolt...

For one cymbal, one trap tray, base to create a cymbal tree etc.Combination stand consisting of combination stand base, foldable 134 insert tube 1...