Hardware

Additional set of four plug-in legs with level adjustment for podium

Dimensions: 100 x 100 cmPodium height: thanks to the special design of the four solid steel plugin legs with level adjustment, the podium can be se...

for freely suspended mounting (cross-shaped holder fitted with rubber bands) suitable for glissando gongs Ø 21 - 30 cm and Burmese gongs Ø 21 - 25...

266; 8 cm; for power blocks cencerros/cowbells with holder Ø 16 mm concert bongos, concert tom-tomssliding holder; square 20 mm fits:basic holder 2...

Multifunctional sliding holder with three-step adapter 265 is for instruments with rubber mounting-piece(e.g. wood blocks, temple blocks, poly bloc...

263; 18 cm, instruments with rubber mounting-piecee.g. wood blocks, temple blocks, poly blocks, cowbells/cencerros with holder Ø 10 mmTechnical dat...

Ø 10 x 100 mm with adapter holder for Kolberg cymbale antique/crotales for instruments with rubber mounting-pieces (e.g. wood blocks, temple block...

rubber washer 260 GSpare part for:sliding holder 260, 260L, 260Sholder/pin 260Z, 260ZA, 260ZWholder/pin with angled holder 260VK, 260VK

Multifunctional tilter, very solid designfor individual cymbalsfor continuous tambourine roll (pivot bearing)to mount e.g. transverse tubes in an i...

Very flexible adapter for large structures with open holder for square tubes 20 mm, tubes Ø 20 resp. 16 mm. The square tubes can also be clamped on...

Padded cover made of heavy-duty synthetic fibre for Kolberg xylophone 2495 or 2495GSColour: black

Transport case without casters for folded Kolberg xylophone 2495Exterior dimensions (height x width x depth): c. 34 x 140 x 70 cmMaterial Thick pad...

Triangle clamp-on holder for music stand bar or trap tray. 

Set of 8 bags for C-marimba "Avantgarde" 2445A with aluminium resonators.

Accurately fitting cover plate for Kolberg glockenspiel 2425 made of laminated birchwood with a finish of synthetic resin; for the protection of ba...

Cover made of heavy-duty, padded synthetic fibre for Kolberg glockenspiel 2425 and 2425GS. Colour: black

Combination example from our range: Combination stand for 5 power blocks 1470-5XLS Combination stand for 4 poly/wood blocks 1470-4KS Lithophone/s...

Extremely sturdy concert cymbal holders made of hard-wearing laminated wood with a storage area e. g. for mallets or small percussion.Supporting bo...

Infinitely height-adjustable mobile Kolberg combination stand Sliding holders for Kolberg antique cymbals/crotales Completely dismountable Fully lo...

Very sturdy cymbal holders for Kolberg bass drum stands.Support bracketsThe support brackets are covered with high-quality, thick, black wool felt....

for 5 poly blocks size 4 - 8 (1470PR5) especially suited for Xenakis "Rebonds B" fix arrangement in steps Ø 16 mm Fits e.g.insert tube 164 - 169cy...

Height-adjustable mobile stand for up to 4 tubular bells Base: very sturdy folding stand with large base manual damping for 4 tubular bells infini...

Combination stand with suspension bow for one cymbal or one triangle. This special bow ensures optimal and free sound development. For cymbals up t...

Consisting of: Combination stand base, foldable 136 Insert tube 166 2 x Adjusting ring 160 Basic holder 240 Triangle finger-holder 247 with lea...

Consisting of: Combination stand base, foldable 136 Insert tube 166 2 x Adjusting ring 160 Basic holder 240 Triangle holder 242 All combinatio...

Infinitely height-adjustable mobile Kolberg combination stand (carriage) Flexible adapters Completely dismountable Infinitely height adjustable Ful...

Combination stand consisting of combination stand base, foldable 134 insert tube 166 2 x adjusting ring 160 transverse tube 2267 5 x sliding ho...

for tam-tam damper 118

Lengthwise extension for 2 insert tubes 164 - 169 Description: main tubeadapter tube with 2 fixing screws for the connection of:- 2 insert tubes Ø ...

Length Ø 16 mm (without cymbal stacker) 110 cmCymbal stacker noinsert tube Ø 16 mm, fits combinations with:adapter 251, 252trap tray 230 - 230GAcym...

rubber washer 161 GSpare part for:cymbal stacker 161, 161W, 162insert tube 164 - 168tilter 253

Completely dismountable Infinitely height adjustable 1470-6KM fits: 6 poly blocks(size 2 - 7, 1470P6) or 6 wood blocks (size 2 - 7, 1470-6) set-up...

Completely dismountable Infinitely height adjustable 1470_5KS - 5 poly blocks (size 2 - 6, 1470P5) or5 wood blocks (size 2 - 6, 1470_5)5 steps 134...

Completely dismountable Infinitely height adjustable 1470-6KM fits: 5 poly blocks (size 2 - 6, 1470P5) or 5 wood blocks (size 2 - 6, 1470-5)set-up...

for snare drum 14" for traditional and modern, symmetrical playing| - Freely swinging instead of permanently fixed - The traditional method of pla...

Combination stand for glass chimes 1380 - 1386 Consisting of: combination stand base, foldable 136 insert tube 166 2 x adjusting ring 160 basic ...

Combination stand consisting of combination stand base, foldable 134 insert tube 164 adjusting ring 160 3 x basic holder 240 3 x triangle/unive...

- Freely swinging instead of permanently fixed -The traditional method of playing the drums in military music served as the sound model for the new...

Sturdy, light-weight folding standSizesItem no. 133Basic height 26 cmRecommended use: for snare drum standTechnical data Ø 16 mmBase for: insert tu...

Height-adjustable mobile stand for large thundersheet 1325 Base: very sturdy combination stand base, especially suited for wide, high and heavy st...

Very sturdy folding stand with large base, especially suited to carry wide, high and heavy structuresSizesItem no. 130basic height 60 cm Technical ...

Side frame bar fully locking swivel casters Ø 75 mm for combination stand (carriage). The side frame bar can be used for the left or right side (id...

T-shaped transverse tube Ø square 20 mmFits e.g. :angled insert tube 113twin clip-bolt adjusting ring 115Dclip-bolt adjusting ring 115, 115S, 115Rt...

to be combined with main tube 203T (26 cm long)

holder: Ø square 25 mm Fits e.g.transverse tube 125, 125Sdistance tube 222S, 225Gangled insert tube 113basic holder 240, 240L, 240Stransverse tube ...

U-shaped adjusting ring with star-shaped opening for very flexible use.Square tubes 20 mm, round tubes Ø 16 and round tubes Ø 20 mm can be clamped ...

T-shaped transverse tube; square 20 mm fits:angled insert tube 113twin clip-bolt adjusting ring 115Dclip-bolt adjusting ring 115, 115S, 115Rtwin ad...

angled insert tube; square 25 mm fits:transverse tube T-shaped 114K, 114L, 114KS, 114LStransverse tube 223 - 229basic holder 240, 240Ltwin adjustin...