Hardware

Very sturdy trap trays for mallets and small percussion. Material Plywood plate with wooden raised edges of solid beech wood on 2 resp. 3 sides. Co...

Consisting of: Combination stand base, foldable 136 Insert tube 166 Adjusting ring 160 Trap tray for percussion, small 230 Height: approx. 70 -...

Kolberg wire-wound snares for snare drum 14in

Kolberg rosin powderfor Kolberg Tambourines

Triangle holder with soft, wide leather cover for comfortable hand-held play, for suspension on the music stand bar or on the combination stand sys...

Trap tray consisting of Combination stand base, foldable 136 Insert tube 166 Adjusting ring 160 Trap tray for percussion, large 230G Height: ap...

Adjusting ring/axial lock for round tubes Ø 16 mmadjusting ring 16 mm fitsinsert tube 164 - 169sliding holder 265 - 268adapter 265Zsnare drum stand...

Kolberg Percussion proudly presents the further developed successor of top-of-the-line model 3100H.Users of our double-bass chairs are already fami...

Kolberg WING BOLT/THREADED HOOK M6 x 16mm

The combination of holder/pin with a U-shaped adjusting ring (115U, 116U) results in an open sliding holder, that can be mounted/dismounted flexibl...

Increases the seat height by 12 cm. Suitable for chairs with pneumatic height adjustment mechanism.

Very sturdy trap trays for mallets and small percussion.MaterialPlywood plate with wooden raised edges of solid beech wood on 2 resp. 3 sides.Conta...

Sturdy folding stand with holder for 1 pair of concert cymbals up to 22"/56 cm Completely dismountable Infinitely height-adjustable Very sturdy hol...

Combination stand for set of car horns Gershwin "An American in Paris" 1190 Consisting of: combination stand base 134 adjusting ring 160 insert t...

Straight cymbal stand or...For combination with: mallet holder 280 for 6 pairs of mallets or mallet holder 281I for 10 pairs of mallets Combinatio...

Kolberg Percussion proudly presents the further developed successor of top-of-the-line model 3100H.Comfortable adjustment of backrest, seat inclina...

Padded bags for tambourines, made of synthetic fibre.The bag is provided with a grip strap and a sewn-on outside pocket for accessories, like for e...

Kolberg gut snares for drum

padded black triangle bag made of hard-wearing synthetic fibre with compartmentsSizefits two Kolberg triangles up to 21 cmMaterialhard-wearing synt...

insert hole Ø 7.5 mm fitstriangle holder 241, 242, 243holder/pin 260Z, 260ZA, 260ZWholder/pin with angled holder 260VL, 260VKadapter 265Ztambourine...

Length Ø 16 mm(without cymbal stacker) 40 cm Cymbal stacker  yes Technical data tip Ø 7.5 mmrubber top for cymbals 161Acymbal stacker 161, 162cymba...

For one cymbal, one trap tray, base to create a cymbal tree etc.Combination stand consisting of: combination stand base, foldable 136 insert tube ...

Sturdy, light-weight folding stand Basic height: 80 cmRecommended use: for trap tray, cymbal stand, mallet holder vertical tube Ø 16mmBase for: ins...

Back in 1973, the timpani/percussion chair 3110 was the first Kolberg chair to establish itself successfully in a symphony orchestra. This model of...

A safety pneumatic spring mechanism allows fluid, smooth, silent height adjustment by means of a release lever. approx. 58 - 84 cm Seat shape: roun...

- for combination stand (carriage) based on 120- with 2 insert holes each (Ø 16 mm, 10 mm) at the tubes' ends square tube Ø square 20 mm Fits e.g.:...

completely dismountable infinitely height adjustable approx. 55 - 85 cm fully locking swivel casters Ø 75 mm Item no. CBSTC2-F4Fits e.g. cencerro...

Cross-shaped/X-shaped holder For inclined structures (insert holes 15°, 30° offset) 226X; 60 x 60 cm; 3 insert holes Ø 16 mm: - 90° (centre) - 15...

Cross-shaped/X-shaped holder For inclined structures (insert holes 15°, 30° offset) 224X; 45 x 45 cm; 3 insert holes Ø 16 mm: - 90° (centre) - 15...

Infinitely height-adjustable mobile Kolberg combination stand Sliding holders Completely dismountable Infinitely height adjustable approx. 55 - 85...

Bracket holder, adjustable for width, with rubber mounting-pieces 142GSH for e.g. gong drums. Special rubber mounting pieces 142GSH are attached to...

Mounted on combination stand 899S the case 899 is conveniently located at working height. By means of a countersunk rosette at the bottom side of t...

Covers made of heavy-duty, padded synthetic fibre for Kolberg celesta. Colour: black

Multi-functional twin adjusting ring for the connection of square tubes 20 mm, 25 mm and 30 mm, adapter for the combination stand system 300 series...

NEW MODEL This light yet extremely sturdy model can be completely taken apart, allowing easy transportation in hand luggage with great space saving...

Natural heads, rolled (not mounted)   We deliver different premium-quality calf heads or goat heads.   Ordering information It is important that yo...

NEW MODEL This light yet extremely sturdy model can be completely taken apart, allowing easy transportation in hand luggage with great space saving...

Height-adjustable mobile stand for e.g. 2 tam-tams up to Ø 85 cm, tuned gongs, bell plates, tubular bells,...Infinitely height-adjustable approx. 1...

The instrument can be slid into the case without disassembly and is firmly fixed with adjustable elastic straps.   Item no. VI3 for vibraphone, 3 o...

The acoustic sound shields are held firmly in place in the flight case by means of close-fitting firm foam rubber cushioning. There is a separate c...

Item no. PGSTC-HSuitable for e.g. bell plates C2 - H2Width 2x 250cm (2 stands)Consisting of 4 x 310, 8 x 312, 12 x 315G, 12 x 315S, 2 x 328, 2 x 32...

Padded cover made of heavy-duty synthetic fibre for Kolberg glockenspiel 2426GS   Colour: black

Kolberg HSM610 Threaded hook M6, chrome-plated

completely dismountable infinitely height adjustable fully locking swivel casters Ø 75 mm Item no. CBSTF0-H0 Fits e.g. cencerros f - hWidth 130 cm...

completely dismountable infinitely height adjustable fully locking swivel casters Ø 75 mm Item no. CBSTC1-H1Fits e.g. cencerros c1 - h1Width 180 c...

completely dismountable infinitely height adjustable fully locking swivel casters Ø 75 mm Item no. CBSTC1-C2Fits e.g. cencerros c1 - c2Width 180 c...

Position holes Ø 16 mm for 16 pairs of mallets, suitable for all brands. Mounted on combination stand 899S the case is conveniently located at work...

to retrofit on Kolberg Concert bass drums only