Kolberg Combination stands

Height adjustable, mobile stand, for ex. for tam-tams up to Ø 120 cm/48 in and heavy tuned gongs.Collapsible to compact dimensions - Ideal for trav...

- Freely swinging instead of permanently fixed - The traditional method of playing the drums in military music served as the sound model for the ne...

Combination stand for 5 triangles in classic suspension (open angle of the triangle pointing to the side), consisting of: Combination stand base, f...

Very sturdy holders for concert cymbals, with tray for e.g. mallets and small percussion. Support bracketsThe support brackets are covered with hig...

Extra sturdy combination stand with damper for e.g. 1 tam-tam Ø 100 cm and more.Both side frame arms adjustable for width by approx. 16 cm (stabili...

Transverse tubes 223 feature an additional insert tube Ø 10 mm. The fixing screw is flexibly mounted where needed (no side noises caused by loose f...

Very sturdy trap trays for mallets and small percussion.MaterialPlywood plate with wooden raised edges of solid beech wood on 2 sides.Contact surfa...

Very sturdy folding stand with large base and fully locking swivel casters Ø 75 mm, especially suited to carry wide, high and heavy structuresSizes...

Very sturdy folding stand with large base and fully locking swivel casters Ø 75 mm, especially suited to carry wide, high and heavy structuresSizes...

 for snare-drum stand, upper part, "free suspended" 140FS

Height-adjustable mobile stand for 1 tam-tam up to Ø 85 cm. Infinitely height-adjustable approx. 120 - 205 cm 3 fully locking swivel casters Ø 75 m...

Straight cymbal stand or...For combination with: mallet holder 280 for 6 pairs of mallets or mallet holder 281I for 10 pairs of mallets Combinatio...

Consisting of: Combination stand base, foldable 136 Insert tube 168 Adjusting ring 160 Trap tray for percussion, small, asymmetric adapter piece...

Combination stand consisting of combination stand base, foldable 134 insert tube 164 adjusting ring 160 2 x cymbal stacker 161 cymbals not incl...

Table stand consisting ofCombination stand four-legged base with casters 110H2 x main tube 2042 x insert tube 1662 x adjusting ring 160Wooden trap ...

holder square 20 mm fitsbasic holder 240, 240L, 240Stransverse tube 223 - 229-3, 122, 122Stransverse tube, T-shaped 114K, 114L, 114KS, 114LStransve...

Supporting bar for triangle.As universal holder also suitable for wood blocks, cowbells etc. triangle holder7.5 mm fits:basic holder 240sliding hol...

transverse tube square 20 mm,built into combinations with:twin adjusting ring 221L, 221R, 117, 117WU-shaped adjusting ring/adapter 115USU-shaped ad...

for mobile combination stands based on 120without insert holeslength: 150 cmTechnical datatransverse tube square 20 mm, built into combinations wit...

main tube Ø 20 mm,fits combinations with:adapter 251, 252insert tube 164 - 169combination stand swivelling upper part 142twin adjusting ring 117, 1...

for mobile combination stands based on 120 without insert holes 229M4; 200 cmTechnical datatransverse tube square 20 mm,built into combinations w...

168; 80 cm; can stack cymbals tip Ø 7.5 mm fits:rubber top for cymbals 161Acymbal stacker 161, 162cymbal sizzler 256mallet holder 280, 280E, 281Iti...

Triangle holder with soft, wide leather cover for comfortable hand-held play, for suspension on the music stand bar or on the combination stand sys...

Very sturdy trap trays for mallets and small percussion. MaterialPlywood plate with wooden raised edges of solid beech wood on 2 resp. 3 sides.Cont...

main tube Ø 20 mm,fits combinations with:adapter 251, 252insert tube 164 - 169combination stand swivelling upper part 142twin adjusting ring 117, 1...

main tube Ø 20 mm,fits combinations with:adapter 251, 252insert tube 164 - 169combination stand swivelling upper part 142twin adjusting ring 117, 1...

Very sturdy combination stand base with fully locking swivel casters Ø 75 mm.110H; 14 cm; four-legged very wide base for high and wide gibbet stand...

multifunctional three-step holder/pinThe combination of holder/pin 265Z und U-shaped adjusting ring 115U results in an open sliding holder 265, tha...

holder for combination stand included with 4 location holes for maracas or handle castanets Ideal for rhythmic play with hands or mallets. Choose...

Ø 110 mm x 55 mmSmall and compact: This travelling stand for the TimPad is an ideal accessory on tour.Warm up, practice, work out wherever you can ...

Permanent thumb roll, tuning, dampingFrom free sounding to muffled rhythmically articulate passages, with their adjustable tuning and damping knob ...

Twin adjusting ring for the connection of square tubes 20 mm, round tubes Ø 16 mm and round tubes Ø 20 mm. Round tubes Ø 20 mm can also be clamped ...

Adjusting ring/axial lock for round tubes Ø 20 mm Technical dataadjusting ring 20 mm fits:main tube 202 - 209 All combination stand parts are made ...

Variants 267, 12 cm, power blockscencerros/cowbells with holder Ø 16 mmconcert bongos, concert tom-toms   Technical data sliding holder; square 20 ...

204; 40 cmmain tube Ø 20 mm, fits combinations with:adapter 251, 252insert tube 164 - 169combination stand swivelling upper part 142twin adjusting ...

Kolberg WING BOLT M8 X 20 mm

Combination stand with wide base, consisting of combination stand base, foldable 130 main tube 204 adjusting ring 200 insert tube 166 adjustin...

Table stand consisting of    Combination stand base, foldable 136    Insert tube 166    Adjusting ring 160    Trap tray aluminium, large 231GHeight...

Kolberg square Transverse tube 700mm square tube square 20 mm fitssliding holder 260 - 268clip-bolt adjusting ring 115, 115R, 115DU-shaped adjustin...

Technical data tip Ø 7.5 mm rubber top for cymbals 161Acymbal stacker 161, 162cymbal sizzler 256mallet holder 280, 280E, 281Itilter 253insert tube ...

Supporting bar for triangleThe new version of the well-known and proven triangle holder 242 optimises the sound of the instrument. Thanks to an inn...

insert hole Ø 7.5 mm fitstriangle holder 241, 242, 243holder/pin 260Z, 260ZA, 260ZWholder/pin with angled holder 260VL, 260VKadapter 265Ztambourine...

Transverse tube 224 features an additional insert tube Ø 10 mm and Ø 7.5 mm. The fixing screw is flexibly mounted where needed (no side noises caus...

264 inner Ø approx. 6 cmsheathed with rubber sleeveguide ring for tubular bells (only partly for use as damping ring)holder for e.g. guiro/reco-rec...

Twin adjusting ring for the connection of square tubes 20 mm, round tubes Ø 16 mm and round tubes Ø 20 mm. Round tubes Ø 20 mm can also be clamped ...

(cymbal top / shaft): 8.5 cm / 20 cm

Sturdy, light-weight folding stand136; 60 cm; for trap tray, cymbal standvertical tubeØ 16mmBase for: insert tube 164 - 169snare-drum stand upper p...

location hole Ø 16 mmFitting e.g.: Sliding holders 266, 267, 268, 265 Holders/pins 260ZG