Kolberg Combination stands

Height-adjustable mobile stand for e.g. 2 tam-tams up to Ø 85 cm, tuned gongs, bell plates, tubular bells,...Infinitely height-adjustable approx. 1...

Item no. PGSTC-HSuitable for e.g. bell plates C2 - H2Width 2x 250cm (2 stands)Consisting of 4 x 310, 8 x 312, 12 x 315G, 12 x 315S, 2 x 328, 2 x 32...

Kolberg HSM610 Threaded hook M6, chrome-plated

completely dismountable infinitely height adjustable fully locking swivel casters Ø 75 mm Item no. CBSTF0-H0 Fits e.g. cencerros f - hWidth 130 cm...

completely dismountable infinitely height adjustable fully locking swivel casters Ø 75 mm Item no. CBSTC1-H1Fits e.g. cencerros c1 - h1Width 180 c...

completely dismountable infinitely height adjustable fully locking swivel casters Ø 75 mm Item no. CBSTC1-C2Fits e.g. cencerros c1 - c2Width 180 c...

to retrofit

Adjustable for width and height, mobile, completely demountable, as base for combination stands with several levels. You can hang up Kolberg bass d...

Mobile stand, adjustable for height, for Kolberg bass drums  Infinitely height adjustable Extremely sturdy due to horizontal and vertical double st...

Mobile stand, adjustable for height, for Kolberg bass drums and standardised bass drums of other makes. Infinitely height adjustable Extremely stur...

Combination stand system 300 series Extra sturdy stand system for large structures with heavy instruments as e.g. bell plates, tam-tams, tuned gong...

Description twin hook (separate fixing screw) suspension in 2 points - ideal for bell plates and thunder sheets:suspension cord of the instrument g...

For the connection of 2 square tubes 30 mm (90° offset)Technical dataØ 30 mm cross partFits e.g. square transverse tube 320 - 330Zangled bar 336 - ...

for freely suspended mounting (cross-shaped holder fitted with rubber bands) suitable for glissando gongs Ø 21 - 30 cm and Burmese gongs Ø 21 - 25...

266; 8 cm; for power blocks cencerros/cowbells with holder Ø 16 mm concert bongos, concert tom-tomssliding holder; square 20 mm fits:basic holder 2...

Multifunctional sliding holder with three-step adapter 265 is for instruments with rubber mounting-piece(e.g. wood blocks, temple blocks, poly bloc...

263; 18 cm, instruments with rubber mounting-piecee.g. wood blocks, temple blocks, poly blocks, cowbells/cencerros with holder Ø 10 mmTechnical dat...

Ø 10 x 100 mm with adapter holder for Kolberg cymbale antique/crotales for instruments with rubber mounting-pieces (e.g. wood blocks, temple block...

rubber washer 260 GSpare part for:sliding holder 260, 260L, 260Sholder/pin 260Z, 260ZA, 260ZWholder/pin with angled holder 260VK, 260VK

Multifunctional tilter, very solid designfor individual cymbalsfor continuous tambourine roll (pivot bearing)to mount e.g. transverse tubes in an i...

Very flexible adapter for large structures with open holder for square tubes 20 mm, tubes Ø 20 resp. 16 mm. The square tubes can also be clamped on...

foldable, sturdy "X"-stand with central height adjustment 78 to 90 cm easy to transport fully locking swivel casters Ø 75 mm for glockenspiel 2420...

Triangle clamp-on holder for music stand bar or trap tray. 

Combination example from our range: Combination stand for 5 power blocks 1470-5XLS Combination stand for 4 poly/wood blocks 1470-4KS Lithophone/s...

Extremely sturdy concert cymbal holders made of hard-wearing laminated wood with a storage area e. g. for mallets or small percussion.Supporting bo...

Infinitely height-adjustable mobile Kolberg combination stand Sliding holders for Kolberg antique cymbals/crotales Completely dismountable Fully lo...

Very sturdy cymbal holders for Kolberg bass drum stands.Support bracketsThe support brackets are covered with high-quality, thick, black wool felt....

Very sturdy trap trays for mallets and small percussion.MaterialPlywood plate with wooden raised edges of solid beech wood on 2 resp. 3 sides.Conta...

for 5 poly blocks size 4 - 8 (1470PR5) especially suited for Xenakis "Rebonds B" fix arrangement in steps Ø 16 mm Fits e.g.insert tube 164 - 169cy...

Height-adjustable mobile stand for up to 4 tubular bells Base: very sturdy folding stand with large base manual damping for 4 tubular bells infini...

Combination stand with suspension bow for one cymbal or one triangle. This special bow ensures optimal and free sound development. For cymbals up t...

Consisting of: Combination stand base, foldable 136 Insert tube 166 2 x Adjusting ring 160 Basic holder 240 Triangle finger-holder 247 with lea...

Consisting of: Combination stand base, foldable 136 Insert tube 166 2 x Adjusting ring 160 Basic holder 240 Triangle holder 242 All combinatio...

Infinitely height-adjustable mobile Kolberg combination stand (carriage) Flexible adapters Completely dismountable Infinitely height adjustable Ful...

Combination stand consisting of combination stand base, foldable 134 insert tube 166 2 x adjusting ring 160 transverse tube 2267 5 x sliding ho...

for tam-tam damper 118

Lengthwise extension for 2 insert tubes 164 - 169 Description: main tubeadapter tube with 2 fixing screws for the connection of:- 2 insert tubes Ø ...

Length Ø 16 mm (without cymbal stacker) 110 cmCymbal stacker noinsert tube Ø 16 mm, fits combinations with:adapter 251, 252trap tray 230 - 230GAcym...

rubber washer 161 GSpare part for:cymbal stacker 161, 161W, 162insert tube 164 - 168tilter 253

Completely dismountable Infinitely height adjustable 1470-6KM fits: 6 poly blocks(size 2 - 7, 1470P6) or 6 wood blocks (size 2 - 7, 1470-6) set-up...

Completely dismountable Infinitely height adjustable 1470_5KS - 5 poly blocks (size 2 - 6, 1470P5) or5 wood blocks (size 2 - 6, 1470_5)5 steps 134...

Completely dismountable Infinitely height adjustable 1470-6KM fits: 5 poly blocks (size 2 - 6, 1470P5) or 5 wood blocks (size 2 - 6, 1470-5)set-up...

for snare drum 14" for traditional and modern, symmetrical playing| - Freely swinging instead of permanently fixed - The traditional method of pla...

Combination stand for glass chimes 1380 - 1386 Consisting of: combination stand base, foldable 136 insert tube 166 2 x adjusting ring 160 basic ...

Sturdy folding stand with holder for 1 pair of concert cymbals up to 22"/56 cm Completely dismountable Infinitely height-adjustable Very sturdy hol...

Combination stand consisting of combination stand base, foldable 134 insert tube 164 adjusting ring 160 3 x basic holder 240 3 x triangle/unive...

- Freely swinging instead of permanently fixed -The traditional method of playing the drums in military music served as the sound model for the new...

Sturdy, light-weight folding standSizesItem no. 133Basic height 26 cmRecommended use: for snare drum standTechnical data Ø 16 mmBase for: insert tu...