Kolberg Combination Stand Parts

Very sturdy holders for concert cymbals, with tray for e.g. mallets and small percussion. Support bracketsThe support brackets are covered with hig...

Transverse tubes 223 feature an additional insert tube Ø 10 mm. The fixing screw is flexibly mounted where needed (no side noises caused by loose f...

Very sturdy trap trays for mallets and small percussion.MaterialPlywood plate with wooden raised edges of solid beech wood on 2 sides.Contact surfa...

Very sturdy folding stand with large base and fully locking swivel casters Ø 75 mm, especially suited to carry wide, high and heavy structuresSizes...

Very sturdy folding stand with large base and fully locking swivel casters Ø 75 mm, especially suited to carry wide, high and heavy structuresSizes...

 for snare-drum stand, upper part, "free suspended" 140FS

holder square 20 mm fitsbasic holder 240, 240L, 240Stransverse tube 223 - 229-3, 122, 122Stransverse tube, T-shaped 114K, 114L, 114KS, 114LStransve...

Supporting bar for triangle.As universal holder also suitable for wood blocks, cowbells etc. triangle holder7.5 mm fits:basic holder 240sliding hol...

transverse tube square 20 mm,built into combinations with:twin adjusting ring 221L, 221R, 117, 117WU-shaped adjusting ring/adapter 115USU-shaped ad...

for mobile combination stands based on 120without insert holeslength: 150 cmTechnical datatransverse tube square 20 mm, built into combinations wit...

main tube Ø 20 mm,fits combinations with:adapter 251, 252insert tube 164 - 169combination stand swivelling upper part 142twin adjusting ring 117, 1...

for mobile combination stands based on 120 without insert holes 229M4; 200 cmTechnical datatransverse tube square 20 mm,built into combinations w...

168; 80 cm; can stack cymbals tip Ø 7.5 mm fits:rubber top for cymbals 161Acymbal stacker 161, 162cymbal sizzler 256mallet holder 280, 280E, 281Iti...

Very sturdy combination stand base with fully locking swivel casters Ø 75 mm.110H; 14 cm; four-legged very wide base for high and wide gibbet stand...

Triangle holder with soft, wide leather cover for comfortable hand-held play, for suspension on the music stand bar or on the combination stand sys...

Very sturdy trap trays for mallets and small percussion. MaterialPlywood plate with wooden raised edges of solid beech wood on 2 resp. 3 sides.Cont...

main tube Ø 20 mm,fits combinations with:adapter 251, 252insert tube 164 - 169combination stand swivelling upper part 142twin adjusting ring 117, 1...

main tube Ø 20 mm,fits combinations with:adapter 251, 252insert tube 164 - 169combination stand swivelling upper part 142twin adjusting ring 117, 1...

multifunctional three-step holder/pinThe combination of holder/pin 265Z und U-shaped adjusting ring 115U results in an open sliding holder 265, tha...

holder for combination stand included with 4 location holes for maracas or handle castanets Ideal for rhythmic play with hands or mallets. Choose...

Mallet holder (mallet rake) for up to 6 pairs of mallets. With rubberised bars to avoid disturbing noises. for shaft Ø 16 mm holder width: 35 cm Te...

Permanent thumb roll, tuning, dampingFrom free sounding to muffled rhythmically articulate passages, with their adjustable tuning and damping knob ...

Twin adjusting ring for the connection of square tubes 20 mm, round tubes Ø 16 mm and round tubes Ø 20 mm. Round tubes Ø 20 mm can also be clamped ...

Adjusting ring/axial lock for round tubes Ø 20 mm Technical dataadjusting ring 20 mm fits:main tube 202 - 209 All combination stand parts are made ...

Variants 267, 12 cm, power blockscencerros/cowbells with holder Ø 16 mmconcert bongos, concert tom-toms   Technical data sliding holder; square 20 ...

204; 40 cmmain tube Ø 20 mm, fits combinations with:adapter 251, 252insert tube 164 - 169combination stand swivelling upper part 142twin adjusting ...

Kolberg square Transverse tube 700mm square tube square 20 mm fitssliding holder 260 - 268clip-bolt adjusting ring 115, 115R, 115DU-shaped adjustin...

Technical data tip Ø 7.5 mm rubber top for cymbals 161Acymbal stacker 161, 162cymbal sizzler 256mallet holder 280, 280E, 281Itilter 253insert tube ...

Supporting bar for triangleThe new version of the well-known and proven triangle holder 242 optimises the sound of the instrument. Thanks to an inn...

insert hole Ø 7.5 mm fitstriangle holder 241, 242, 243holder/pin 260Z, 260ZA, 260ZWholder/pin with angled holder 260VL, 260VKadapter 265Ztambourine...

Transverse tube 224 features an additional insert tube Ø 10 mm and Ø 7.5 mm. The fixing screw is flexibly mounted where needed (no side noises caus...

264 inner Ø approx. 6 cmsheathed with rubber sleeveguide ring for tubular bells (only partly for use as damping ring)holder for e.g. guiro/reco-rec...

Twin adjusting ring for the connection of square tubes 20 mm, round tubes Ø 16 mm and round tubes Ø 20 mm. Round tubes Ø 20 mm can also be clamped ...

(cymbal top / shaft): 8.5 cm / 20 cm

Sturdy, light-weight folding stand136; 60 cm; for trap tray, cymbal standvertical tubeØ 16mmBase for: insert tube 164 - 169snare-drum stand upper p...

location hole Ø 16 mmFitting e.g.: Sliding holders 266, 267, 268, 265 Holders/pins 260ZG

Kolberg 260S Sliding Holder Square 20mm Ø10x100mm

Length Ø 16 mm(without cymbal stacker) 40 cm Cymbal stacker  yes Technical data tip Ø 7.5 mmrubber top for cymbals 161Acymbal stacker 161, 162cymba...

Mallet holder (mallet rake) for up to 10 pairs of mallets. With rubberised bars to avoid disturbing noises. for shaft Ø 16 mm holder width: 60 cm T...

Kolberg 226 transverse tube square 20 mm diameter600mm long

Triangle holder with soft, wide leather cover for comfortable hand-held play, for suspension on the music stand bar or on the combination stand sys...

Adjusting ring/axial lock for round tubes Ø 16 mmadjusting ring 16 mm fitsinsert tube 164 - 169sliding holder 265 - 268adapter 265Zsnare drum stand...

Clip-bolt adjusting ring for the safe suspension of percussion instruments, like e.g. tam-tams, thundersheets, tuned gongs, bells etc.The clip-bolt...

Kolberg WING BOLT/THREADED HOOK M6 x 16mm

incl. screwsFitting e.g.: Sliding holders 260, 261, 262, 263, 265 Holders/pins 260VK, 260VL, 260Z, 260ZA, 260ZW

115R; 1 fixed hook, 1 separate fixing screw(suspension hook remains in one position)Especially suited for tubular bellsadjusting ring square 20 mm ...

Twin clip-bolt adjusting ring for mounting of tuned gongs, tam-tams, tubular bells, thunder sheets, bells etc.115D is twin clip-bolt (separate fixi...

with adapter holder for Kolberg cymbale antique/crotales for instruments with rubber mounting-pieces (e.g. wood blocks, temple blocks, poly blocks...