Classical percussion
Filters
- Adams (2)
- Black Swamp Percussion (28)
- BMV Mallets (8)
- CB (3)
- Contemporanea (2)
- Danmar (1)
- Dragonfly (123)
- DW (4)
- EMUS (2)
- Evans (30)
- Freer Percussion (124)
- Grover (13)
- Innovative Percussion (115)
- JG Percussion (21)
- Kolberg (312)
- Latin Percussion (13)
- Los Cabos (38)
- Ludwig (1)
- Majestic (6)
- Malletech (25)
- Mano (1)
- Marimba One (27)
- Meinl (50)
- Mike Balter (7)
- Musser (4)
- Paiste (4)
- Pearl (2)
- Promark (40)
- Promuco (3)
- RB (2)
- Remo (2)
- Rhythm Tech (1)
- RimRiser (3)
- Ron Vaughn (3)
- Sabian (2)
- Schlagkraft (28)
- Sonor (3)
- Suzuki (3)
- Tama (1)
- Tamboa (1)
- Tank Drum (1)
- Vater (51)
- Vic Firth (169)
- Yamaha (6)
- Zildjian (13)
Kolberg 100R-142B combination swivelling stand for drums 12-22in
Consisting of:Combination stand 3 legged base with casters 100RMain tube 202Adjusting ring 200Adjusting ring 160Swivelling stand upper part 142BMob...
View full detailsKolberg 140FS drum stick holder with rosette
for snare-drum stand, upper part, "free suspended" 140FS
Kolberg 970-16 Felt approx. 500 x 450 mm
Kolberg 970-16 felt sheet approx. 500 x 450mm
Kolberg 280 mallet holder (rake) for 6 pairs of mallets
Mallet holder (mallet rake) for up to 6 pairs of mallets. With rubberised bars to avoid disturbing noises.for shaft Ø 16 mmholder width: 35 cmTechn...
View full detailsKolberg TKP Rosin Powder for tambourine
Kolberg rosin powderfor Kolberg Tambourines
Kolberg 136-230G Trap Tray 450x600 mm
Trap tray consisting of Combination stand base, foldable 136 Insert tube 166 Adjusting ring 160 Trap tray for percussion, large 230G Height: ap...
View full detailsKolberg 230GAM Table 450x600mm 2 sides 2 attachments
230GAM; large; asymmetric + centred; 45 x 60 cm; 2 sides openVery sturdy trap trays for mallets and small percussion.MaterialPlywood plate with woo...
View full detailsKolberg KBRS Hand Cymbal Strap, padded
Shaped cymbal handles with interior padding made from high-quality, soft leather.Cymbal not included
Kolberg KBR Hand Cymbal Straps, reinforced
Very stable hand straps made from high-quality, soft leather
Kolberg 614NS gut snares for snare drum 14in
Kolberg gut snares for drum
Kolberg 136-231G Trap Tray 450x600 mm aluminum
Table stand consisting of Combination stand base, foldable 136 Insert tube 166 Adjusting ring 160 Trap tray aluminium, large 231GHeight...
View full detailsKolberg 161 cymbal stacker Ø 16 x 100 mm
Length (cymbal top / shaft): 10 cm / 10 cmTechnical data cymbal top; 7.5 mm; rubber top for cymbals 161Acymbal sizzler 256mallet holder 280 - 281cy...
View full detailsKolberg 164 INSERT TUBE Ø 16 MM
Length Ø 16 mm(without cymbal stacker)40 cmCymbal stacker yesTechnical datatip Ø 7.5 mmrubber top for cymbals 161Acymbal stacker 161, 162cymbal siz...
View full detailsKolberg 162 Cymbal Stacker 20cm
(cymbal top / shaft): 8.5 cm / 20 cm
Kolberg 134-1 Combination Cymbal Stand 50-80cm
For one cymbal, one trap tray, base to create a cymbal tree etc.Combination stand consisting of combination stand base, foldable 134 insert tube 1...
View full detailsKolberg 136-1 combination/cymbal stand 70 - 120 cm high
For one cymbal, one trap tray, base to create a cymbal tree etc.Combination stand consisting of: combination stand base, foldable 136 insert tube ...
View full detailsKolberg 238GB Cymbal cradle for concert cymbals large
Very sturdy holders for concert cymbals, with tray for e.g. mallets and small percussion.Support bracketsThe support brackets are covered with high...
View full detailsKolberg 247 triangle finger-holder with leather cover
Triangle holder with soft, wide leather cover for comfortable hand-held play, for suspension on the music stand bar or on the combination stand sys...
View full detailsKolberg WING BOLT THREADED HOOK M6 x 16mm
Kolberg WING BOLT/THREADED HOOK M6 x 16mm
Kolberg 286G Square metal mounting-piece - large - with screws
location hole Ø 16 mmFitting e.g.: Sliding holders 266, 267, 268, 265 Holders/pins 260ZG
Kolberg 221R Twin Adjusting Ring Ø 16mm Square 20mm
Twin adjusting ring for the connection of square tubes 20 mm, round tubes Ø 16 mm and round tubes Ø 20 mm. Round tubes Ø 20 mm can also be clamped ...
View full detailsKolberg 220RT Single Roto Tom Mounting Rail
220RT 10 cm 1 RotoTomholder 16 mm fits: insert tube 164 - 168; sliding holder 265 - 268; tilter 253Combination examples from our range: Combination...
View full detailsKolberg HSM616 THREADED HOOK M6 CHROME PLATED
Kolberg HSM616 THREADED HOOK M6 CHROME-PLATED
Kolberg 116S adjusting ring with threaded hook square 25mm
Clip-bolt adjusting rings for mounting tuned gongs, tam-tams, tubular bells, thundersheets, bells, etc.116S is 1 hook, open clip-bolt adjusting rin...
View full detailsKolberg 264 guide ring/holder Ø 60 mm rubber coated
264 inner Ø approx. 6 cmsheathed with rubber sleeveguide ring for tubular bells (only partly for use as damping ring)holder for e.g. guiro/reco-rec...
View full detailsKolberg 116 clip-bolt adjusting ring square 25 mm
Clip-bolt adjusting ring for the safe suspension of percussion instruments, like e.g. tam-tams, thundersheets, tuned gongs, bells etc.The clip-bolt...
View full detailsKolberg 115-116 clip-bolt adjusting ring square 20/25 mm
Clip-bolt adjusting ring for tubes square 20 mm or square 25 mminsert hole; square 20 mm:basic holder 240, 240L, 240Stransverse tube 223 - 229-3, 1...
View full detailsKolberg 284 holder for cowbells
Holder for cow bells Ø 10 mm bell not included
Kolberg 160T adjusting ring/triangle holder ring oval
Kolberg 160T adjusting ring/triangle holder ring oval
Kolberg 285 Rubber Mounting-Piece, Ø 10 MM
incl. screwsFitting e.g.: Sliding holders 260, 261, 262, 263, 265 Holders/pins 260VK, 260VL, 260Z, 260ZA, 260ZW
Kolberg 160 Adjusting Ring/Axial Lock diam 16mm
Adjusting ring/axial lock for round tubes Ø 16 mmadjusting ring 16 mm fitsinsert tube 164 - 169sliding holder 265 - 268adapter 265Zsnare drum stand...
View full detailsKolberg 115U U-shaped adjusting ring square 20 mm diam 7.5 mm
holder square 20 mm fitsbasic holder 240, 240L, 240Stransverse tube 223 - 229-3, 122, 122Stransverse tube, T-shaped 114K, 114L, 114KS, 114LStransve...
View full detailsKolberg 260VK Holder/Pin Ø 10 X 100 MM With Angled Holder 90°
The combination of 260VL or 260VK with a U-shaped adjusting ring (115U, 116U) results in an open sliding holder, that can be mounted/dismounted fle...
View full detailsKolberg 115S clip-bolt adjusting ring square 20 mm
Clip-bolt adjusting ring for mounting of tuned gongs, tam-tams, tubular bells, thunder sheets, bells etc. 115S1 hook , open clip-bolt adjusting rin...
View full detailsKolberg 260 sliding holder square 20 10 diam x 100 mm
with adapter holder for Kolberg cymbale antique/crotales for instruments with rubber mounting-pieces (e.g. wood blocks, temple blocks, poly blocks...
View full detailsKolberg 261 sliding holder square 20 10 diam x 60 mm
261; 6 cm fits instruments with rubber mounting-piece(e.g. wood blocks, temple blocks, poly blocks, cowbells/cencerros)guiroscencerros/cowbells wit...
View full detailsKolberg 115D twin clip-bolt adjusting ring square 20 mm
Twin clip-bolt adjusting ring for mounting of tuned gongs, tam-tams, tubular bells, thunder sheets, bells etc.115D is twin clip-bolt (separate fixi...
View full detailsKolberg 262 sliding holder square 20 10 diam x 120 mm
262 12 cm is for instruments with rubber mounting-piece(e.g. wood blocks, temple blocks, poly blocks, cowbells/cencerros)guiroscencerros/cowbells w...
View full detailsKolberg 115R clip-bolt adjusting ring square 20 mm
115R; 1 fixed hook, 1 separate fixing screw(suspension hook remains in one position)Especially suited for tubular bellsadjusting ring square 20 mm ...
View full detailsKolberg 136 Combination Stand Base 600mm Ø16 mm
Sturdy, light-weight folding stand136; 60 cm; for trap tray, cymbal standvertical tubeØ 16mmBase for: insert tube 164 - 169snare-drum stand upper p...
View full detailsKolberg 209 MAIN TUBE Ø 20 MM 110cm long
main tube Ø 20 mm,fits combinations with:adapter 251, 252insert tube 164 - 169combination stand swivelling upper part 142twin adjusting ring 117, 1...
View full detailsKolberg 224 transverse tube square 20mm/45cm
Transverse tube 224 features an additional insert tube Ø 10 mm and Ø 7.5 mm. The fixing screw is flexibly mounted where needed (no side noises caus...
View full detailsKolberg 240 basic holder square 20X200mm Ø 16/7.5mm
insert hole Ø 7.5 mm fitstriangle holder 241, 242, 243holder/pin 260Z, 260ZA, 260ZWholder/pin with angled holder 260VL, 260VKadapter 265Ztambourine...
View full detailsKolberg 134 Combination Stand Base 400mm Ø16 mm
Sturdy, light-weight folding stand134; 40 cm; for trap tray, lowvertical tube; 16 mm: insert tube 164 - 169snare-drum stand upper part 140, 140Etil...
View full detailsKolberg 226 transverse tube square 60cm
Kolberg 226 transverse tube square20 mm diameter600mm long
Kolberg 260S Sliding Holder Square 20mm Ø10x100mm
Kolberg 260S Sliding Holder Square 20mm Ø10x100mm
Kolberg 227 transverse tube square 20mm/70cm
Kolberg square Transverse tube 700mmsquare tube square 20 mm fitssliding holder 260 - 268clip-bolt adjusting ring 115, 115R, 115DU-shaped adjusting...
View full detailsKolberg 242FS triangle holder Free Suspended
Supporting bar for triangleThe new version of the well-known and proven triangle holder 242 optimises the sound of the instrument. Thanks to an inn...
View full details