Classical percussion

Table stand consisting of    Combination stand base, foldable 136    Insert tube 166    Adjusting ring 160    Trap tray aluminium, large 231GHeight...

Length (cymbal top / shaft): 10 cm / 10 cmTechnical data cymbal top; 7.5 mm; rubber top for cymbals 161Acymbal sizzler 256mallet holder 280 - 281cy...

Length Ø 16 mm(without cymbal stacker) 40 cm Cymbal stacker  yes Technical data tip Ø 7.5 mmrubber top for cymbals 161Acymbal stacker 161, 162cymba...

(cymbal top / shaft): 8.5 cm / 20 cm

For one cymbal, one trap tray, base to create a cymbal tree etc.Combination stand consisting of combination stand base, foldable 134 insert tube 1...

For one cymbal, one trap tray, base to create a cymbal tree etc.Combination stand consisting of: combination stand base, foldable 136 insert tube ...

Very sturdy holders for concert cymbals, with tray for e.g. mallets and small percussion.Support bracketsThe support brackets are covered with high...

Triangle holder with soft, wide leather cover for comfortable hand-held play, for suspension on the music stand bar or on the combination stand sys...

Kolberg WING BOLT/THREADED HOOK M6 x 16mm

location hole Ø 16 mmFitting e.g.: Sliding holders 266, 267, 268, 265 Holders/pins 260ZG

Twin adjusting ring for the connection of square tubes 20 mm, round tubes Ø 16 mm and round tubes Ø 20 mm. Round tubes Ø 20 mm can also be clamped ...

220RT 10 cm 1 RotoTomholder 16 mm fits: insert tube 164 - 168; sliding holder 265 - 268; tilter 253Combination examples from our range: Combination...

Kolberg HSM616 THREADED HOOK M6 CHROME-PLATED

Clip-bolt adjusting rings for mounting tuned gongs, tam-tams, tubular bells, thundersheets, bells, etc.116S is 1 hook, open clip-bolt adjusting rin...

264 inner Ø approx. 6 cmsheathed with rubber sleeveguide ring for tubular bells (only partly for use as damping ring)holder for e.g. guiro/reco-rec...

Clip-bolt adjusting ring for the safe suspension of percussion instruments, like e.g. tam-tams, thundersheets, tuned gongs, bells etc.The clip-bolt...

Clip-bolt adjusting ring for tubes square 20 mm or square 25 mminsert hole; square 20 mm:basic holder 240, 240L, 240Stransverse tube 223 - 229-3, 1...

Holder for cow bells Ø 10 mm bell not included

Kolberg 160T adjusting ring/triangle holder ring oval

incl. screwsFitting e.g.: Sliding holders 260, 261, 262, 263, 265 Holders/pins 260VK, 260VL, 260Z, 260ZA, 260ZW

Adjusting ring/axial lock for round tubes Ø 16 mmadjusting ring 16 mm fitsinsert tube 164 - 169sliding holder 265 - 268adapter 265Zsnare drum stand...

holder square 20 mm fitsbasic holder 240, 240L, 240Stransverse tube 223 - 229-3, 122, 122Stransverse tube, T-shaped 114K, 114L, 114KS, 114LStransve...

The combination of 260VL or 260VK with a U-shaped adjusting ring (115U, 116U) results in an open sliding holder, that can be mounted/dismounted fle...

Clip-bolt adjusting ring for mounting of tuned gongs, tam-tams, tubular bells, thunder sheets, bells etc. 115S1 hook , open clip-bolt adjusting rin...

with adapter holder for Kolberg cymbale antique/crotales for instruments with rubber mounting-pieces (e.g. wood blocks, temple blocks, poly blocks...

261; 6 cm fits instruments with rubber mounting-piece(e.g. wood blocks, temple blocks, poly blocks, cowbells/cencerros)guiroscencerros/cowbells wit...

Twin clip-bolt adjusting ring for mounting of tuned gongs, tam-tams, tubular bells, thunder sheets, bells etc.115D is twin clip-bolt (separate fixi...

262 12 cm is for instruments with rubber mounting-piece(e.g. wood blocks, temple blocks, poly blocks, cowbells/cencerros)guiroscencerros/cowbells w...

115R; 1 fixed hook, 1 separate fixing screw(suspension hook remains in one position)Especially suited for tubular bellsadjusting ring square 20 mm ...

Sturdy, light-weight folding stand136; 60 cm; for trap tray, cymbal standvertical tubeØ 16mmBase for: insert tube 164 - 169snare-drum stand upper p...

main tube Ø 20 mm,fits combinations with:adapter 251, 252insert tube 164 - 169combination stand swivelling upper part 142twin adjusting ring 117, 1...

Transverse tube 224 features an additional insert tube Ø 10 mm and Ø 7.5 mm. The fixing screw is flexibly mounted where needed (no side noises caus...

insert hole Ø 7.5 mm fitstriangle holder 241, 242, 243holder/pin 260Z, 260ZA, 260ZWholder/pin with angled holder 260VL, 260VKadapter 265Ztambourine...

Sturdy, light-weight folding stand134; 40 cm; for trap tray, lowvertical tube; 16 mm: insert tube 164 - 169snare-drum stand upper part 140, 140Etil...

Kolberg 226 transverse tube square 20 mm diameter600mm long

Kolberg 260S Sliding Holder Square 20mm Ø10x100mm

Kolberg square Transverse tube 700mm square tube square 20 mm fitssliding holder 260 - 268clip-bolt adjusting ring 115, 115R, 115DU-shaped adjustin...

Supporting bar for triangleThe new version of the well-known and proven triangle holder 242 optimises the sound of the instrument. Thanks to an inn...

Permanent thumb roll, tuning, dampingFrom free sounding to muffled rhythmically articulate passages, with their adjustable tuning and damping knob ...

Supporting bar for triangle.As universal holder also suitable for wood blocks, cowbells etc. triangle holder7.5 mm fits:basic holder 240sliding hol...

168; 80 cm; can stack cymbals tip Ø 7.5 mm fits:rubber top for cymbals 161Acymbal stacker 161, 162cymbal sizzler 256mallet holder 280, 280E, 281Iti...

Clip-bolt adjusting ring for mounting of tuned gongs, tam-tams, tubular bells, thunder sheets, bells etc. 1 hook (= fixing screw) adjusting ring; s...

Combination stand consisting of combination stand base, foldable 134 insert tube 164 adjusting ring 160 2 x cymbal stacker 161 cymbals not incl...

Height-adjustable mobile stand for e.g. 1 tam-tam up to Ø 85 cm, tuned gongs, bell plates, tubular bells,... Infinitely height-adjustable approx. 1...

Very sturdy trap trays for mallets and small percussion.MaterialPlywood plate with wooden raised edges of solid beech wood on 2 sides.Contact surfa...

Table stand consisting ofCombination stand four-legged base with casters 110H2 x main tube 2042 x insert tube 1662 x adjusting ring 160Wooden trap ...

Table stand consisting of Combination stand four-legged base with casters 110H 2 x main tube 204 2 x insert tube 166 2 x adjusting ring 160 Woo...

Very sturdy trap trays for mallets and small percussion. MaterialPlywood plate with wooden raised edges of solid beech wood on 2 resp. 3 sides.Cont...