Classical percussion

Kolberg 160T adjusting ring/triangle holder ring oval

incl. screwsFitting e.g.: Sliding holders 260, 261, 262, 263, 265 Holders/pins 260VK, 260VL, 260Z, 260ZA, 260ZW

Clip-bolt adjusting ring for mounting of tuned gongs, tam-tams, tubular bells, thunder sheets, bells etc. 115S1 hook , open clip-bolt adjusting rin...

262 12 cm is for instruments with rubber mounting-piece(e.g. wood blocks, temple blocks, poly blocks, cowbells/cencerros)guiroscencerros/cowbells w...

115R; 1 fixed hook, 1 separate fixing screw(suspension hook remains in one position)Especially suited for tubular bellsadjusting ring square 20 mm ...

Sturdy, light-weight folding stand136; 60 cm; for trap tray, cymbal standvertical tubeØ 16mmBase for: insert tube 164 - 169snare-drum stand upper p...

main tube Ø 20 mm,fits combinations with:adapter 251, 252insert tube 164 - 169combination stand swivelling upper part 142twin adjusting ring 117, 1...

Transverse tube 224 features an additional insert tube Ø 10 mm and Ø 7.5 mm. The fixing screw is flexibly mounted where needed (no side noises caus...

Sturdy, light-weight folding stand134; 40 cm; for trap tray, lowvertical tube; 16 mm: insert tube 164 - 169snare-drum stand upper part 140, 140Etil...

Kolberg 226 transverse tube square 20 mm diameter600mm long

Kolberg 260S Sliding Holder Square 20mm Ø10x100mm

Supporting bar for triangleThe new version of the well-known and proven triangle holder 242 optimises the sound of the instrument. Thanks to an inn...

Permanent thumb roll, tuning, dampingFrom free sounding to muffled rhythmically articulate passages, with their adjustable tuning and damping knob ...

168; 80 cm; can stack cymbals tip Ø 7.5 mm fits:rubber top for cymbals 161Acymbal stacker 161, 162cymbal sizzler 256mallet holder 280, 280E, 281Iti...

Clip-bolt adjusting ring for mounting of tuned gongs, tam-tams, tubular bells, thunder sheets, bells etc. 1 hook (= fixing screw) adjusting ring; s...

Combination stand consisting of combination stand base, foldable 134 insert tube 164 adjusting ring 160 2 x cymbal stacker 161 cymbals not incl...

Height-adjustable mobile stand for e.g. 1 tam-tam up to Ø 85 cm, tuned gongs, bell plates, tubular bells,... Infinitely height-adjustable approx. 1...

Very sturdy trap trays for mallets and small percussion.MaterialPlywood plate with wooden raised edges of solid beech wood on 2 sides.Contact surfa...

Table stand consisting ofCombination stand four-legged base with casters 110H2 x main tube 2042 x insert tube 1662 x adjusting ring 160Wooden trap ...

Table stand consisting of Combination stand four-legged base with casters 110H 2 x main tube 204 2 x insert tube 166 2 x adjusting ring 160 Woo...

Consisting of: Combination stand base, foldable 136 Insert tube 168 Adjusting ring 160 Trap tray for percussion, small, asymmetric adapter piece...

Consisting of: Combination stand base, foldable 136 Insert tube 168 Adjusting ring 160 Trap tray for percussion, small, asymmetric adapter piece...

Very sturdy combination stand base with fully locking swivel casters Ø 75 mm.110H; 14 cm; four-legged very wide base for high and wide gibbet stand...

Very sturdy holders for concert cymbals, with tray for e.g. mallets and small percussion. Support bracketsThe support brackets are covered with hig...

holder for combination stand included with 4 location holes for maracas or handle castanets Ideal for rhythmic play with hands or mallets. Choose...

multifunctional three-step holder/pinThe combination of holder/pin 265Z und U-shaped adjusting ring 115U results in an open sliding holder 265, tha...

Variants 267, 12 cm, power blockscencerros/cowbells with holder Ø 16 mmconcert bongos, concert tom-toms   Technical data sliding holder; square 20 ...

Adjusting ring/axial lock for round tubes Ø 20 mm Technical dataadjusting ring 20 mm fits:main tube 202 - 209 All combination stand parts are made ...

Twin adjusting ring for the connection of square tubes 20 mm, round tubes Ø 16 mm and round tubes Ø 20 mm. Round tubes Ø 20 mm can also be clamped ...

Very sturdy folding stand with large base, especially suited to carry wide, high and heavy structuresItem no. 130Kbasic height 29 cmTechnical datav...

Transverse tubes 223 feature an additional insert tube Ø 10 mm. The fixing screw is flexibly mounted where needed (no side noises caused by loose f...

Very sturdy folding stand with large base and fully locking swivel casters Ø 75 mm, especially suited to carry wide, high and heavy structuresSizes...

Very sturdy folding stand with large base and fully locking swivel casters Ø 75 mm, especially suited to carry wide, high and heavy structuresSizes...

204; 40 cmmain tube Ø 20 mm, fits combinations with:adapter 251, 252insert tube 164 - 169combination stand swivelling upper part 142twin adjusting ...

main tube Ø 20 mm,fits combinations with:adapter 251, 252insert tube 164 - 169combination stand swivelling upper part 142twin adjusting ring 117, 1...

Mobile, height adjustable stand with pedal-damper for Kolberg crotales c7 - c8 (item no. 2375).Playing height: approx. 90 - 120 cmDamperThe pedal-o...

main tube Ø 20 mm,fits combinations with:adapter 251, 252insert tube 164 - 169combination stand swivelling upper part 142twin adjusting ring 117, 1...

Adjustable for width and height, mobile, completely demountable, as base for combination stands with several levels. You can hang up Kolberg bass d...

Mobile stand, adjustable for height, for Kolberg bass drums and standardised bass drums of other makes. Infinitely height adjustable Extremely stur...

Infinitely height-adjustable mobile Kolberg combination stand Sliding holders Completely dismountable Infinitely height adjustable Fully locking sw...

Combination stand for 5 triangles in classic suspension (open angle of the triangle pointing to the side), consisting of: Combination stand base, f...

The Kolberg combination stand system is an elaborate, standardised, highly versatile professional modular system. It offers multiple and multi-func...

Anti-rotation suspension in two points (open angle of the triangle pointing downward) for five triangles, consisting of: Combination stand base, fo...

Triangle holder with soft, wide leather cover for comfortable hand-held play, for suspension on the music stand bar or on the combination stand sys...

Ø 110 mm x 55 mmSmall and compact: This travelling stand for the TimPad is an ideal accessory on tour.Warm up, practice, work out wherever you can ...

combination stand for poly blocks size 4 - 8 (1470PR5) especially suited for Xenakis "Rebonds B" fix arrangement in steps consisting of 134, 166, ...

Combination stand for 1 Kolberg guiro 1451 - 1453Consisting of: Combination stand base 134 2 x Adjusting ring 160 Insert tube 166 Transverse tub...

Combination stand consisting ofcombination stand base, foldable 134insert tube 1662 x adjusting ring 160transverse tube 2265 x sliding holder 260Te...