Kolberg Bases, transverse and insert tubes

Combination stand system 300 series Extra sturdy stand system for large structures with heavy instruments as e.g. bell plates, tam-tams, tuned gong...

foldable, sturdy "X"-stand with central height adjustment 78 to 90 cm easy to transport fully locking swivel casters Ø 75 mm for glockenspiel 2420...

Combination example from our range: Combination stand for 5 power blocks 1470-5XLS Combination stand for 4 poly/wood blocks 1470-4KS Lithophone/s...

Lengthwise extension for 2 insert tubes 164 - 169 Description: main tubeadapter tube with 2 fixing screws for the connection of:- 2 insert tubes Ø ...

for tam-tam damper 118

Length Ø 16 mm (without cymbal stacker) 110 cmCymbal stacker noinsert tube Ø 16 mm, fits combinations with:adapter 251, 252trap tray 230 - 230GAcym...

Sturdy, light-weight folding standSizesItem no. 133Basic height 26 cmRecommended use: for snare drum standTechnical data Ø 16 mmBase for: insert tu...

Very sturdy folding stand with large base, especially suited to carry wide, high and heavy structuresSizesItem no. 130basic height 60 cm Technical ...

Side frame bar fully locking swivel casters Ø 75 mm for combination stand (carriage). The side frame bar can be used for the left or right side (id...

T-shaped transverse tube Ø square 20 mmFits e.g. :angled insert tube 113twin clip-bolt adjusting ring 115Dclip-bolt adjusting ring 115, 115S, 115Rt...

T-shaped transverse tube; square 20 mm fits:angled insert tube 113twin clip-bolt adjusting ring 115Dclip-bolt adjusting ring 115, 115S, 115Rtwin ad...

Rotary protection and support for combination stand/gibbet standfits:holder; square 30 mm; supporting tube 112holder/pin; Ø 20 mm; combination stan...

Very sturdy combination stand base with fully locking swivel casters Ø 75 mm.Item no. 110RBasic height 14 cmNumber of insert holes 1 x Ø 25 mm; 4 x...

Very sturdy combination stand base with fully locking swivel casters Ø 75 mm.Item no. 100RBasic height 14 cmNumber of insert holes 4 x Ø 20 mmDescr...

Kolberg WING BOLT/THREADED HOOK M6 x 16mm

location hole Ø 16 mmFitting e.g.: Sliding holders 266, 267, 268, 265 Holders/pins 260ZG

Twin adjusting ring for the connection of square tubes 20 mm, round tubes Ø 16 mm and round tubes Ø 20 mm. Round tubes Ø 20 mm can also be clamped ...

220RT 10 cm 1 RotoTomholder 16 mm fits: insert tube 164 - 168; sliding holder 265 - 268; tilter 253Combination examples from our range: Combination...

Kolberg HSM616 THREADED HOOK M6 CHROME-PLATED

Clip-bolt adjusting rings for mounting tuned gongs, tam-tams, tubular bells, thundersheets, bells, etc.116S is 1 hook, open clip-bolt adjusting rin...

264 inner Ø approx. 6 cmsheathed with rubber sleeveguide ring for tubular bells (only partly for use as damping ring)holder for e.g. guiro/reco-rec...

Clip-bolt adjusting ring for the safe suspension of percussion instruments, like e.g. tam-tams, thundersheets, tuned gongs, bells etc.The clip-bolt...

Holder for cow bells Ø 10 mm bell not included

Kolberg 160T adjusting ring/triangle holder ring oval

incl. screwsFitting e.g.: Sliding holders 260, 261, 262, 263, 265 Holders/pins 260VK, 260VL, 260Z, 260ZA, 260ZW

Adjusting ring/axial lock for round tubes Ø 16 mmadjusting ring 16 mm fitsinsert tube 164 - 169sliding holder 265 - 268adapter 265Zsnare drum stand...

holder square 20 mm fitsbasic holder 240, 240L, 240Stransverse tube 223 - 229-3, 122, 122Stransverse tube, T-shaped 114K, 114L, 114KS, 114LStransve...

The combination of 260VL or 260VK with a U-shaped adjusting ring (115U, 116U) results in an open sliding holder, that can be mounted/dismounted fle...

Clip-bolt adjusting ring for mounting of tuned gongs, tam-tams, tubular bells, thunder sheets, bells etc. 115S1 hook , open clip-bolt adjusting rin...

with adapter holder for Kolberg cymbale antique/crotales for instruments with rubber mounting-pieces (e.g. wood blocks, temple blocks, poly blocks...

261; 6 cm fits instruments with rubber mounting-piece(e.g. wood blocks, temple blocks, poly blocks, cowbells/cencerros)guiroscencerros/cowbells wit...

Twin clip-bolt adjusting ring for mounting of tuned gongs, tam-tams, tubular bells, thunder sheets, bells etc.115D is twin clip-bolt (separate fixi...

262 12 cm is for instruments with rubber mounting-piece(e.g. wood blocks, temple blocks, poly blocks, cowbells/cencerros)guiroscencerros/cowbells w...

115R; 1 fixed hook, 1 separate fixing screw(suspension hook remains in one position)Especially suited for tubular bellsadjusting ring square 20 mm ...

Stable, light-weight folding stand with fully locking swivel casters Ø 75 mmBasic height: 49 cmTechnical datavertical tube Ø 16 mm Base for: insert...

Mobile stand, adjustable for height, for Kolberg bass drums  Infinitely height adjustable Extremely sturdy due to horizontal and vertical double st...

Spike board with four holes to adjust distance to chair.Material: sturdy multi-ply beech woodHoles: Ø 3.5 cmLength: 96 cm

Spike board with four holes to adjust distance to chair. Material: non-slip rubber matHoles: Ø 4 cmDimensions: approx. 95 x 10 cm The spike board c...

Very sturdy folding stand with large base, especially suited to carry wide, high and heavy structuresItem no. 130Kbasic height 29 cmTechnical datav...

Sturdy, light-weight folding stand134; 40 cm; for trap tray, lowvertical tube; 16 mm: insert tube 164 - 169snare-drum stand upper part 140, 140Etil...

Mobile stand, adjustable for height, for Kolberg bass drums and standardised bass drums of other makes. Infinitely height adjustable Extremely stur...

Adjustable for width and height, mobile, completely demountable, as base for combination stands with several levels. You can hang up Kolberg bass d...

Transverse tubes 223 feature an additional insert tube Ø 10 mm. The fixing screw is flexibly mounted where needed (no side noises caused by loose f...

Very sturdy folding stand with large base and fully locking swivel casters Ø 75 mm, especially suited to carry wide, high and heavy structuresSizes...

Very sturdy folding stand with large base and fully locking swivel casters Ø 75 mm, especially suited to carry wide, high and heavy structuresSizes...

transverse tube square 20 mm,built into combinations with:twin adjusting ring 221L, 221R, 117, 117WU-shaped adjusting ring/adapter 115USU-shaped ad...

for mobile combination stands based on 120without insert holeslength: 150 cmTechnical datatransverse tube square 20 mm, built into combinations wit...

main tube Ø 20 mm,fits combinations with:adapter 251, 252insert tube 164 - 169combination stand swivelling upper part 142twin adjusting ring 117, 1...