Products

The Gibraltar Vintage Brass 14" / 20 Strand Snare Wire is a modern replacement for that old classic snare strand. Included is a nylon snare cord

Make sure your drums are tuned and ready to go.These 2" (52mm) tension rods are desgined to fit with large toms and floor toms.

Make sure your drums are tuned and ready to go.These 1-3/8" (35mm) tension rods with 7/32" 24 threads are designed to fit with piccolo snare drums ...

The Gibraltar Tom Mount Bracket is designed to work with 7/8" Pearl style tom arms.It can be mounted to a tom shell or a suspension plate. It also ...

Single tom arm with 10" tube and gear tilter. [1 pack]

Material: Metal Item dimensions: L x W x H17.8 x 43.2 x 5.1 Centimetres Item weight: 399 g

Clam style L-Rod tom arm for easy and solid placement.

Mounts to bass drum counter hoop. 9.5mm adjustable L-arm with super protective grip. [1 pack]

Use this rubber protector to help prevent your bass drum pedal clamp from scratching or marring your bass drum hoop.Size 0.18(h) x 4(w) x 5.25(l) i...

The Gibraltar Rubber Bass Drum Hoop Insert is designed for metal bass drum hoops and fits under your bass drum pedal hoop clamp.

They are 4-3/16" (106mm) long x 7/32 thread diameter, and tighten using a drum key.

Gibraltar's Bass Drum Riser elevates an 18-inch or 20-inch kick drum two inches off the floor.It allows optimal alignment with your pedal beater.

The Gibraltar SC-BDTR/L 4-3/8" Bass Drum T Tension Rod comes in a pack of 4.They are 4-3/8" (112) long with an M6, 1.0 thread pitch, and tighten us...

The Gibraltar SC-BDTR/S 4-3/16" Bass Drum T Tension Rod comes in a pack of 4.They are 4-1/2" (114mm) long with an M5, 0.8 thread pitch and tighten ...

Use these felt strips to muffle your bass drum without a pillow.

The Gibraltar SC-BS2 Light Weight Bass Drum Spurs come with cast mounting brackets and solid steel rods with rubber tips.These brackets allow the s...

The Gibraltar SC-BS4 Medium Weight Bass Drum Spurs, are telescopic bass drum spurs with an angle adjustable mount.This style is one of the most com...

The Gibraltar SC-BS5 Gull Wing Bass Drum Spurs are strong but lightweight.They offer your drum the maximum support wiithout overkill. They come wit...

Mounts cowbells, blocks or tambourines to an adjustable floor stand which accepts most bass drum pedals. [1 pack]

The Gibraltar SC-CFL/4 Large Cymbal Stand Felts offer a soft but supportive seat for your cymbal to rest on while you play, so that your cymbal alw...

The Gibraltar SC-CH Bass Drum Claw Hook is a universal claw hook for wood bass drum hoops.size: 1.5(h) x 3.75(w) x 4.5(l) inches

The SC-CLF/4 Hi Hat Clutch Felts fit on the threaded stem of a hi hat clutch, and protects the upper hi hat cymbal from contact with the metal nuts...

Add a crash, splash, microphone, or percussion toy to your kit by just using a 12 inch. mini boom arm with an attachment clamp. The SC-CMBAC is a 1...

The Gibraltar SC-CS8MM 8mm Black Cymbal Stand Tilter Sleeves fit over the threaded portion of a cymbal mount to protect the cymbals from from makin...

This handy accessory replaces a cymbal stand wing nut and allows you to stack a second splash or crash six inches directly above another on the sam...

Gibraltar's Hi-Hat Drop Clutch allows you to disengage and drop your top hi-hat cymbal with a simple tap of a drumstick on the release lever.

This geared tilter with adjustable angle mounts to 12.7mm boom.

The Deluxe Classic Snare Drum Throw Off is a cast metal classic style strainer with mounting hardware. Size 1.7(h) x 4(w) x 6.75(l) inches Weight 0.54

Dual 9.5mm percussion mount with twin ratchet. Mounts to cymbal boom. [1 pack] Size 1.25(h) x 7(w) x 16.5(l) inches

The Deluxe Classic Piccolo Snare Drum Throw Off is a cast piccolo metal classic styled strainer, with a traditional side throw lever.

A nice holding place for that soft drink or water for easy access during the gig. Made of a high-test black web material and upgraded stand mount, ...

The Gibraltar X Dunnett Snare Drum Butt Plate is a low profile, die-cast butt end that matches with the R4 or R7 throw offs. The mounting screw dis...

26.5mm x 10.5mm hex diameter - 6.5 inch.5mm x 10.5mm hex diameter - 6.5 inch. mounting post

Wing nut, washer and bolt set fits 9.5mm to 10.5mm posts. [1 pack]Size 0.25(h) x 3.75(w) x 3(l) inchesWeight 0.26

  Size 2.5(h) x 7.5(w) x 9(l) inches Weight 0.38 A universal mounting plate for drum modules, percussion pads, controllers, sample pads and more. ...

The Gibraltar 10.5mm Floating Floor Tom Rubber Feet are designed with a hollow tip allowing each foot to float, increasing the vibration and resona...

Make your cymbal stands do double duty! With this cymbal arm, you can clamp the Grabber to one of your existing stands and add another cymbal to yo...

Screws onto standard 8mm cymbal tilter.Includes S hook for mounting small gongs or rope percussion instruments and accessories.

Gibraltar Port Hole Protector Rings are designed to protect the ported hole cut into your bass drumhead.These two piece rings snap onto both sides ...

Gibraltar Port Hole Protector Rings are designed to protect the ported hole cut into your bass drumhead.These two piece rings snap onto both sides ...

Gibraltar Port Hole Protector Rings are designed to protect the ported hole cut into your bass drumhead. These two piece rings snap onto both sides...

Gibraltar Port Hole Protector Rings are designed to protect the ported hole cut into your bass drumhead. These two piece rings snap onto both sides...

Gibraltar Port Hole Protector Rings are designed to protect the ported hole cut into your bass drumhead.These two piece rings snap onto both sides ...

Gibraltar SC-GPREX Extension Clamp

The Power Rack multi clamp mounts toms, cymbals, and accessories arms to any 1.5 inch.

This fixed right angle clamp with hinged sides from Gibraltar is designed to join two rack bars together at a 90-degree angle.

Mounts percussion and effects accessories on standard 1 1/2” rack bar.9.5mm knurled post is adjustable and secures in position by wing nut

Create a 90 degree inline T connection between two 1.5" rack barsBuild T leg assemblies or connect a cross bar to a vertical bar end-on with this b...