Products

This clamp attaches a tom clamp (CL945B, etc.) or cymbal holder (CH755, etc.) to the hex-shaped pipe and is compatible with 22.2mm diameter pipes.I...

Yamaha HHS3 ultra light hi-hat stand

The locking nut eliminates looseness and slippage. The top hi-hat cymbal secures with a tuning key.

Toggle link and 2 double braced legs.New Hi-hat ClutchLonger Rod for higher setting is includedCymbal Angle Adjustment with Self LockSpring Tension...

Light weight, 3 single braced legs (Pedal side legs open 120°), height adjustable from 65-90cm

The Yamaha HS740A Hi-Hat Stand is a durable, affordable hi hat stand with professional features such as spring tension adjustment and rotating legs...

Chain-linked, 3 double braced rotating legs, 11-step tension adjustable.

Standard hi-hat clutch.

Direct Link, 2 Double-braced Legs, 80-92cm Height Range.• Hi-hat Clutch• Longer rod for higher setting is included• Cymbal angle adjustment with se...

Several clamps for securing tubes of different thickness (φ”15 –φ”34, including hexagonal tubes) are connected to the extended arm. These clamps ca...

The cross clamp is used to connect two hexagonal tubes at 90-degree angles (for example, to connect a leg tube with a tube that has been horizontal...

Designed in close collaboration with Keiko Abe, her Signature Series Mallets are designed to draw out the most from both the performer’s technique ...

Designed in close collaboration with Keiko Abe, her Signature Series Mallets are designed to draw out the most from both the performer’s technique ...

Designed in close collaboration with Keiko Abe, her Signature Series Mallets are designed to draw out the most from both the performer’s technique ...

Designed in close collaboration with Keiko Abe, her Signature Series Mallets are designed to draw out the most from both the performer’s technique ...

Designed in close collaboration with Keiko Abe, her Signature Series Mallets are designed to draw out the most from both the performer’s technique ...

The KU100 is a silent kick unit that can sense your playing dynamics. This unit is designed to reduce the physical sound of playing the bass drum a...

It's Time to Ascend to the Throne!This lightweight single-brace drum throne is a perfect complement to any acoustic or electronic drum kit.Yamaha D...

Clamp for DTX-MULTI 12, DTX900, DTX700 and DTXtreme III drum trigger modules

seat size: Round Seat Design 300mm (Diameter) seat mount: AL Die-cast Seat Mount Legs: 3 Single Braced Legs adjustment: Clamp Rod Type (430-650mm) 

The MS45DR is a 2.1-channel electronic drum monitor system for home use. This simple and compact unit is specially designed to authenticly reproduc...

The Yamaha HXOCII Rack System Open Clamp is used to attach tubes with a diameter of 15-34mm, (including hexagonal tubes) to the hexagonal tube. HEX...

A large 10-inch cymbal pad with attachment to rack system. Newly designed for more natural feel and quietness, you will notice the difference from ...

Yamaha FPDS2A Drum Pedal And Throne Package Includes FP6110 pedal and DS550 drum throne Belt-Drive kick-drum Pedal Single-braced Drum Throne Lightw...

Size: 14X5.5"Shell: BrassConstruction: 1.2mmBearing edge: 45°Hoops: 2.3mm triple flangedLugs: 10Finish: N/A

Size: 14X5.5"Shell: AluminumConstruction: 1.2mmBearing edge: 45°Hoops: 3mm die-castLugs: 10Finish: N/A

Size: 14X6.5"Shell: BrassConstruction: 1.2mmBearing edge: 45°Hoops: 2.3mm triple flangedLugs: 10Finish: N/A

Size: 13X6.5"Shell: BrassConstruction: 1.2mmBearing edge: 45°Hoops: 2.3mm triple-flangedLugs: 10Finish: N/A

Size: 14X5.5"Shell: BirchConstruction: 6-plyBearing edge: 30°Hoops: 1.6mm triple-flangedLugs: 10Finish: Solid Black

The new addition of the metal snare lineup to the Recording Custom series represents the addition of Yamaha’s finest snare drums, using Steve Gadd’...

Size: 14X5.5"Shell: SteelConstruction: 1.2mmBearing edge: 45°Hoops: 2.3mm triple-flangedLugs: 10Finish: N/A

The new addition of the metal snare lineup to the Recording Custom series represents the addition of Yamaha’s finest snare drums, using Steve Gadd’...

Short Boom Arm Cymbal/Cowbell Holder Center Tilter

Yamaha Single Tom Holder CL940LB

Medium weight, single-braced legs, big rubber feet.Snare Basket Adjustment KnobBig Rubber Feet

Yamaha Snare Stand SS850

New ball clamp tilter, heavy weight, double-braced legs with new spikes, 3 arms.Adjustable Angle TileterSnare Basket Adjustment KnobBig Rubber Feet...

Great for accent snare drums.The Yamaha SS-662 is a single-braced, lightweight snare stand that features a compact design. This Yamaha drum stand i...

Hook to hook measures 6cm over all length

SS3 Advanced Lightweight Snare Stand is a solution that recognizes that drummers need simplicity and rock-solid stability. With an advanced lightwe...

HARDWARE NOT INCLUDEDConfiguration:20X17" bass drum10X7" & 12X8" tom14X13" floor tom14X5.5" Snare DrumShell: BirchConstruction: 6 plyBearing ed...

22X17" bass drum10X7" & 12X8" tom16X15" floor tom14X5.5" Snare DrumShell: BirchConstruction: 6 plyHoops: Triple-flangedFinish: Honey Amber The ...

Size: 14X5.5"Material: Birch shellFinish: Real BlackLugs: 10

Size: 14X5.5"Material: Steel shell Finish: N/ALugs: 10

Size: 14X6.5"Material: Steel shell Finish: N/ALugs: 10

High-grade monitor headphones that deliver a balanced sound faithful to the source. Perfect for in the studio, music production at home, or for per...

Put these sleeves on the top of your Yamaha Cymbal Stands' tilters to provide a stable base for the felts and the cymbal itself. The interiors are ...