Hardware accessories

Canopus' highly anticipated brass washers are now available. On first appearance, they may seem to be just a small washer on a tension rod, but it ...

Here is a premium 8mm Yamaha Titanium Wing Bolt. If you are a frequent gigging drummer, you may end up losing a Wing Bolt from time to time. While ...

Yamaha's PYN8SA is a wing nut for use on their cymbal tilters. Secures cymbal between the stand's cymbal felts and can also adjust the degree to wh...

DW 9000 series bass drum pedal footboard. Includes only the 9000 footboard.

Yamaha BT9 Bass Drum Beater includes two weights that allow you to fine tune the feel and sound of your bass drum pedal.

Yamaha CSAT924A Parallel MultiClamp is designed to connect almost any tom arm or cymbal boom arm to anything else you need to clamp it to.

Yamaha cymbal felts come with every Yamaha cymbal stand, but they're easily lost over time. They're absolutely necessary, providing your cymbal a s...

Musser mounting pin and insulator used on M645 and M646 Classic Orchestra bells. Sold in pack of 10.

Musser insulator for orchestra bell sets.

Superior feel in a swiveling 2-leg design for easy positioning in multi-pedal set-ups. [wt. 12.2 lbs] [tallest playing height: 43"] [lowest playing...

Sturdy and easy to position, the 6500 features a unique direct-pull rod linkage for smooth effortless action. [5/8" upper tube] [3/4" base tube] [w...

The heavy-duty DW 5000 Series Hi-Hat Stands are offered in both 2-legged and 3-legged models, featuring DW’s patented Lateral Cymbal Seat Adjustmen...

The HERCULES Percussion Table DS800B is a versatile stand with a removable wave foam matt and rubber edges; this stand safely holds a variety of in...

SLEEVED WASHERS are specifically designed to: Eliminate all metal on metal contact. Produce smoother and more accurate tuning. Fit in 2.3 mm and tr...

The Hendrix Drums Sleeved Washers are not shaped like conventional washers, but feature a “sleeve” for the screw itself. This is similar to cymbal ...

Hook to hook measures 6cm over all length

Put these sleeves on the top of your Yamaha Cymbal Stands' tilters to provide a stable base for the felts and the cymbal itself. The interiors are ...

Zildjian Cymbal Cleaning Polish cleans, polishes, and protects your cymbals. Use this polish on brilliant finish cymbals only. Application is easy ...

Handle for DW Cymbal Stands 5/16X3/4in

Single crotale holder attaches to most vertical stands up to 3/4" in diameter.Chrome PlatedFor Zildjian crotale notes

Gretsch memory locks for use on 12.7mm or 1/2" tom arms (Gretsch, DW and others). Designed to be compatable with the GS-9025 tom bracket.

Single-ended.  Used on toms and floor toms.  Includes mounting bolts and washers.  Gasket not included.Hole spacing: 1-5/16" center to center.

Genuine Gon Bops Replacement Chrome Bongo Tension Hook Assembly Includes Tension Rod, Washer, Super Nut and Rubber Tip Overall Length: 5 1/4 inch

Triple-flanged heavy-duty 2.3mm chrome drum hoops for studio and stage.These hoops provide consistent shape, tension, tuning and a clear, open sound.

The Gibraltar SC-BDKR/L 4-3/8" Bass Drum Key Tension Rod comes in a pack of 4.They are 4-3/8" (112) long x 6mm thread diameter, and tighten using a...

Make sure your drums are tuned and ready to go.These 2-1/4" (58mm) tension rods are designed to fit with large floor toms and bass drums.Size 0.41(...

These 1-5/8" (42mm) tension rods with 7/32" 24 threads are designed to fit with snare drums, small and medium size toms.

This is a 16-wire set of 14" replacement snare wires designed with the snap and sharp rattle needed to help your 14" snare cut through the mix. Fit...

The Gibraltar Steel Snare Wire is available in different sizes to work with 10", 12", 13", and 14" diameters and come in 12, 16, 20, and 42 strand ...

The 13" Gibraltar SC-1316 replacement snare wire offers 16 sturdy strands. This designates the diameter drum the snare is designed to fit. It may n...

Gibraltar Snare Wires 12in

The Gibraltar SC-1408SS is a 2.3mm 14" diameter 8-lug snare side steel drum hoop.

Keeps trailing cables organised and tidy. [4 pack]

The Gibraltar Universal Suspension System is a low mass, 2- point suspension system that fits rack tom sizes 8",10",12", 13" and 14" diameters.The ...

JAW and ratchet with Z rod for mounting splash cymbals.Clamps to drum hoop. [1 pack]

The Deluxe Snare Drum Throw Off has a quick-release throw-off mechanism that allows for easy adjustment of snare tension.

The Gibraltar Tom / Floor Tom Mount Bracket connects directly to a tom shell.It is designed to fit L rods or floor tom legs with diameters from 9.5...

The Gibraltar T Style ABS Wing Nut threads over a cymbal post and acts as a thread protector/cymbal sleeve and a wing nut all in one.Available in b...

This Spanner Multi Clamp allows you to connect two bars together at a right angle that are 1 inch. diameter. Hinged C-clamp for easy removal.

The Gibraltar Wing Nut Tension Black Tom / Floor Tom Bracket mounts to the shell of a drum or tom suspension mount.It allows you to mount a floor t...

Gibraltar SC-STL2 Super Tom-Tom Mount with Memory Lock

The Gibraltar ABS tension rod washers help you to keep your drum in tune.Store them in your gig bag to replace other washers that get lost

A key tension butt plate designed to work with snare drums that have a 2-3/4" mount hole spacing

The Deluxe Snare Drum Butt Plate is designed with a deep channel and high tension drum key bolts that eliminates snare slippage.Keep your snare wir...

The Gibraltar Floor Tom Rubber Feet are designed as replacement feet in the event you lose one from your floor tom leg, or may need an upgrade.Size...