Hardware accessories

Replacement standard DW Hi-Hat Clutch. Fits 7mm rod.The DWSM379 is a standard hi-hat clutch by Drum Workshop (DW). This component comes as standard...

Kolberg square Transverse tube 700mm square tube square 20 mm fitssliding holder 260 - 268clip-bolt adjusting ring 115, 115R, 115DU-shaped adjustin...

Supporting bar for triangleThe new version of the well-known and proven triangle holder 242 optimises the sound of the instrument. Thanks to an inn...

insert hole Ø 7.5 mm fitstriangle holder 241, 242, 243holder/pin 260Z, 260ZA, 260ZWholder/pin with angled holder 260VL, 260VKadapter 265Ztambourine...

Transverse tube 224 features an additional insert tube Ø 10 mm and Ø 7.5 mm. The fixing screw is flexibly mounted where needed (no side noises caus...

264 inner Ø approx. 6 cmsheathed with rubber sleeveguide ring for tubular bells (only partly for use as damping ring)holder for e.g. guiro/reco-rec...

Twin adjusting ring for the connection of square tubes 20 mm, round tubes Ø 16 mm and round tubes Ø 20 mm. Round tubes Ø 20 mm can also be clamped ...

(cymbal top / shaft): 8.5 cm / 20 cm

Sturdy, light-weight folding stand136; 60 cm; for trap tray, cymbal standvertical tubeØ 16mmBase for: insert tube 164 - 169snare-drum stand upper p...

location hole Ø 16 mmFitting e.g.: Sliding holders 266, 267, 268, 265 Holders/pins 260ZG

Kolberg 260S Sliding Holder Square 20mm Ø10x100mm

Length Ø 16 mm(without cymbal stacker) 40 cm Cymbal stacker  yes Technical data tip Ø 7.5 mmrubber top for cymbals 161Acymbal stacker 161, 162cymba...

Kolberg 226 transverse tube square 20 mm diameter600mm long

Shaped cymbal handles with interior padding made from high-quality, soft leather.Cymbal not included

Adjusting ring/axial lock for round tubes Ø 16 mmadjusting ring 16 mm fitsinsert tube 164 - 169sliding holder 265 - 268adapter 265Zsnare drum stand...

Clip-bolt adjusting ring for the safe suspension of percussion instruments, like e.g. tam-tams, thundersheets, tuned gongs, bells etc.The clip-bolt...

For one cymbal, one trap tray, base to create a cymbal tree etc.Combination stand consisting of combination stand base, foldable 134 insert tube 1...

Kolberg WING BOLT/THREADED HOOK M6 x 16mm

For one cymbal, one trap tray, base to create a cymbal tree etc.Combination stand consisting of: combination stand base, foldable 136 insert tube ...

incl. screwsFitting e.g.: Sliding holders 260, 261, 262, 263, 265 Holders/pins 260VK, 260VL, 260Z, 260ZA, 260ZW

115R; 1 fixed hook, 1 separate fixing screw(suspension hook remains in one position)Especially suited for tubular bellsadjusting ring square 20 mm ...

Twin clip-bolt adjusting ring for mounting of tuned gongs, tam-tams, tubular bells, thunder sheets, bells etc.115D is twin clip-bolt (separate fixi...

with adapter holder for Kolberg cymbale antique/crotales for instruments with rubber mounting-pieces (e.g. wood blocks, temple blocks, poly blocks...

261; 6 cm fits instruments with rubber mounting-piece(e.g. wood blocks, temple blocks, poly blocks, cowbells/cencerros)guiroscencerros/cowbells wit...

262 12 cm is for instruments with rubber mounting-piece(e.g. wood blocks, temple blocks, poly blocks, cowbells/cencerros)guiroscencerros/cowbells w...

The combination of 260VL or 260VK with a U-shaped adjusting ring (115U, 116U) results in an open sliding holder, that can be mounted/dismounted fle...

Kolberg 160T adjusting ring/triangle holder ring oval

Holder for cow bells Ø 10 mm bell not included

Clip-bolt adjusting ring for tubes square 20 mm or square 25 mminsert hole; square 20 mm:basic holder 240, 240L, 240Stransverse tube 223 - 229-3, 1...

Clip-bolt adjusting rings for mounting tuned gongs, tam-tams, tubular bells, thundersheets, bells, etc.116S is 1 hook, open clip-bolt adjusting rin...

Length (cymbal top / shaft): 10 cm / 10 cmTechnical data cymbal top; 7.5 mm; rubber top for cymbals 161Acymbal sizzler 256mallet holder 280 - 281cy...

Kolberg HSM616 THREADED HOOK M6 CHROME-PLATED

Clip-bolt adjusting ring for mounting of tuned gongs, tam-tams, tubular bells, thunder sheets, bells etc. 1 hook (= fixing screw) adjusting ring; s...

Clip-bolt adjusting ring for mounting of tuned gongs, tam-tams, tubular bells, thunder sheets, bells etc. 115S1 hook , open clip-bolt adjusting rin...

Vic Firth Multi-Tool Drum Key

Fits 14" DrumsIncludes Mounting CableIdeal for drums with little to no snare bed

The World's Greatest Grip Tape has high-traction and super long lasting grip for all types of drumsticks.• Black color grip tape• Self-locking once...

Ahead Vintage Straight Bass Drum Spurs 9.5mm

Add endless acoustic sound effects or muffling to your bass drum and control it on the fly from your drum throne.Attaches to any wood hoops using o...

Includes washers and nut5/16" diameter5/16" diameter

Made from an LP exclusive, proprietary plastic blend that provides maximum strength and durability. Compact and ergonomic design Ensures solid plac...

Fits standard model LP Afuche/Cabasas (LP234A)Mounts to stands up to 1-1/8" diameter

The Accessory Series - Loop Kit is a unique design that offers a non-marring locking system for small eyelets and heavy instruments. For use with ...

Keep all your Perfect Pairs within reach! This fully adjustable stick caddy clamps onto any hardware for quick switches between all the sounds you ...

VicKick Beaters®, Felt Radial.Medium-hard premium felt head creates clear articulation with a full low-end sound. Dual orientation offers multiple ...

Wood shaft distributes weight for a unbelievable sense of balance and throw. The VKB5 unlocks a sense of touch and control that is simply not attai...

Radial. Hard maple head creates super rhythmic clarity. Weight of ball helps produce a full sound. Dual orientation offers multiple sound and feel ...

Oval. Medium felt core covered with fleece for an incredibly full and warm sound! Outstanding for jazz! Known for having the most comprehensive lin...