Hardware accessories

LP LP349A Timbale clamping nut

The S1030LS Pearl Snare Drum Stand is a height extended version of the S1030 stand and features single braced legs for a more lightweight option.HE...

Gorilla Snot is a gripping aid. It has been developed by and for professionals who demand flexibility, functionality, and efficiency in the tools o...

The Gibraltar Ball L-Rod will fit any of the Gibraltar L-Rod platforms and in many manufacturers' original tom mounting systems.The ball L-Rod give...

Padded bags for tambourines, made of synthetic fibre.The bag is provided with a grip strap and a sewn-on outside pocket for accessories, like for e...

Kolberg rosin powderfor Kolberg Tambourines

Kolberg gut snares for drum

Mallet holder (mallet rake) for up to 6 pairs of mallets. With rubberised bars to avoid disturbing noises.for shaft Ø 16 mmholder width: 35 cmTechn...

Very stable hand straps made from high-quality, soft leather

Kolberg WING BOLT M8 X 20 mm

padded black triangle bag made of hard-wearing synthetic fibre with compartmentsSizefits two Kolberg triangles up to 21 cmMaterialhard-wearing synt...

Replacement standard DW Hi-Hat Clutch. Fits 7mm rod.The DWSM379 is a standard hi-hat clutch by Drum Workshop (DW). This component comes as standard...

Replacement classic curved bass drum spurs used by Ludwig and Camco. These 5/16" square legs will fit the smaller original Ludwig 3/8" curved spur ...

Jazz Bright, Light gauge – sensitive, bright, quick, made for drums 5″ or thinner

Table stand consisting of    Combination stand base, foldable 136    Insert tube 166    Adjusting ring 160    Trap tray aluminium, large 231GHeight...

Kolberg square Transverse tube 700mmsquare tube square 20 mm fitssliding holder 260 - 268clip-bolt adjusting ring 115, 115R, 115DU-shaped adjusting...

Supporting bar for triangleThe new version of the well-known and proven triangle holder 242 optimises the sound of the instrument. Thanks to an inn...

insert hole Ø 7.5 mm fitstriangle holder 241, 242, 243holder/pin 260Z, 260ZA, 260ZWholder/pin with angled holder 260VL, 260VKadapter 265Ztambourine...

Transverse tube 224 features an additional insert tube Ø 10 mm and Ø 7.5 mm. The fixing screw is flexibly mounted where needed (no side noises caus...

264 inner Ø approx. 6 cmsheathed with rubber sleeveguide ring for tubular bells (only partly for use as damping ring)holder for e.g. guiro/reco-rec...

Twin adjusting ring for the connection of square tubes 20 mm, round tubes Ø 16 mm and round tubes Ø 20 mm. Round tubes Ø 20 mm can also be clamped ...

(cymbal top / shaft): 8.5 cm / 20 cm

Sturdy, light-weight folding stand136; 60 cm; for trap tray, cymbal standvertical tubeØ 16mmBase for: insert tube 164 - 169snare-drum stand upper p...

location hole Ø 16 mmFitting e.g.: Sliding holders 266, 267, 268, 265 Holders/pins 260ZG

Kolberg 260S Sliding Holder Square 20mm Ø10x100mm

Length Ø 16 mm(without cymbal stacker)40 cmCymbal stacker yesTechnical datatip Ø 7.5 mmrubber top for cymbals 161Acymbal stacker 161, 162cymbal siz...

Kolberg 226 transverse tube square20 mm diameter600mm long

Triangle holder with soft, wide leather cover for comfortable hand-held play, for suspension on the music stand bar or on the combination stand sys...

Trap tray consisting of Combination stand base, foldable 136 Insert tube 166 Adjusting ring 160 Trap tray for percussion, large 230G Height: ap...

Shaped cymbal handles with interior padding made from high-quality, soft leather.Cymbal not included

Adjusting ring/axial lock for round tubes Ø 16 mmadjusting ring 16 mm fitsinsert tube 164 - 169sliding holder 265 - 268adapter 265Zsnare drum stand...

Clip-bolt adjusting ring for the safe suspension of percussion instruments, like e.g. tam-tams, thundersheets, tuned gongs, bells etc.The clip-bolt...

For one cymbal, one trap tray, base to create a cymbal tree etc.Combination stand consisting of combination stand base, foldable 134 insert tube 1...

Kolberg WING BOLT/THREADED HOOK M6 x 16mm

For one cymbal, one trap tray, base to create a cymbal tree etc.Combination stand consisting of: combination stand base, foldable 136 insert tube ...

incl. screwsFitting e.g.: Sliding holders 260, 261, 262, 263, 265 Holders/pins 260VK, 260VL, 260Z, 260ZA, 260ZW

115R; 1 fixed hook, 1 separate fixing screw(suspension hook remains in one position)Especially suited for tubular bellsadjusting ring square 20 mm ...

Twin clip-bolt adjusting ring for mounting of tuned gongs, tam-tams, tubular bells, thunder sheets, bells etc.115D is twin clip-bolt (separate fixi...

with adapter holder for Kolberg cymbale antique/crotales for instruments with rubber mounting-pieces (e.g. wood blocks, temple blocks, poly blocks...

261; 6 cm fits instruments with rubber mounting-piece(e.g. wood blocks, temple blocks, poly blocks, cowbells/cencerros)guiroscencerros/cowbells wit...

262 12 cm is for instruments with rubber mounting-piece(e.g. wood blocks, temple blocks, poly blocks, cowbells/cencerros)guiroscencerros/cowbells w...

The combination of 260VL or 260VK with a U-shaped adjusting ring (115U, 116U) results in an open sliding holder, that can be mounted/dismounted fle...

Kolberg 160T adjusting ring/triangle holder ring oval

Holder for cow bells Ø 10 mm bell not included

Clip-bolt adjusting ring for tubes square 20 mm or square 25 mminsert hole; square 20 mm:basic holder 240, 240L, 240Stransverse tube 223 - 229-3, 1...

Clip-bolt adjusting rings for mounting tuned gongs, tam-tams, tubular bells, thundersheets, bells, etc.116S is 1 hook, open clip-bolt adjusting rin...

Length (cymbal top / shaft): 10 cm / 10 cmTechnical data cymbal top; 7.5 mm; rubber top for cymbals 161Acymbal sizzler 256mallet holder 280 - 281cy...

Kolberg HSM616 THREADED HOOK M6 CHROME-PLATED