Kolberg Combination Stand Parts

266; 8 cm; for power blocks cencerros/cowbells with holder Ø 16 mm concert bongos, concert tom-tomssliding holder; square 20 mm fits:basic holder 2...

Multifunctional sliding holder with three-step adapter 265 is for instruments with rubber mounting-piece(e.g. wood blocks, temple blocks, poly bloc...

rubber washer 260 GSpare part for:sliding holder 260, 260L, 260Sholder/pin 260Z, 260ZA, 260ZWholder/pin with angled holder 260VK, 260VK

Multifunctional tilter, very solid designfor individual cymbalsfor continuous tambourine roll (pivot bearing)to mount e.g. transverse tubes in an i...

for tam-tam damper 118

rubber washer 161 GSpare part for:cymbal stacker 161, 161W, 162insert tube 164 - 168tilter 253

Sturdy, light-weight folding standSizesItem no. 133Basic height 26 cmRecommended use: for snare drum standTechnical data Ø 16 mmBase for: insert tu...

Side frame bar fully locking swivel casters Ø 75 mm for combination stand (carriage). The side frame bar can be used for the left or right side (id...

to be combined with main tube 203T (26 cm long)

Multi-functional twin adjusting ring for the connection of square tubes 20 mm, 25 mm and 30 mm, adapter for the combination stand system 300 series...

U-shaped adjusting ring with star-shaped opening for very flexible use.Square tubes 20 mm, round tubes Ø 16 and round tubes Ø 20 mm can be clamped ...

Sturdy, light-weight folding stand134; 40 cm; for trap tray, lowvertical tube; 16 mm: insert tube 164 - 169snare-drum stand upper part 140, 140Etil...

Mobile stand, adjustable for height, for Kolberg bass drums and standardised bass drums of other makes. Infinitely height adjustable Extremely stur...

Adjustable for width and height, mobile, completely demountable, as base for combination stands with several levels. You can hang up Kolberg bass d...

220RT 10 cm 1 RotoTomholder 16 mm fits: insert tube 164 - 168; sliding holder 265 - 268; tilter 253Combination examples from our range: Combination...

Transverse tubes 223 feature an additional insert tube Ø 10 mm. The fixing screw is flexibly mounted where needed (no side noises caused by loose f...

Very sturdy folding stand with large base and fully locking swivel casters Ø 75 mm, especially suited to carry wide, high and heavy structuresSizes...

holder square 20 mm fitsbasic holder 240, 240L, 240Stransverse tube 223 - 229-3, 122, 122Stransverse tube, T-shaped 114K, 114L, 114KS, 114LStransve...

Supporting bar for triangle.As universal holder also suitable for wood blocks, cowbells etc. triangle holder7.5 mm fits:basic holder 240sliding hol...

transverse tube square 20 mm,built into combinations with:twin adjusting ring 221L, 221R, 117, 117WU-shaped adjusting ring/adapter 115USU-shaped ad...

for mobile combination stands based on 120without insert holeslength: 150 cmTechnical datatransverse tube square 20 mm, built into combinations wit...

main tube Ø 20 mm,fits combinations with:adapter 251, 252insert tube 164 - 169combination stand swivelling upper part 142twin adjusting ring 117, 1...

for mobile combination stands based on 120 without insert holes 229M4; 200 cmTechnical datatransverse tube square 20 mm,built into combinations w...

168; 80 cm; can stack cymbals tip Ø 7.5 mm fits:rubber top for cymbals 161Acymbal stacker 161, 162cymbal sizzler 256mallet holder 280, 280E, 281Iti...

Very sturdy combination stand base with fully locking swivel casters Ø 75 mm.110H; 14 cm; four-legged very wide base for high and wide gibbet stand...

Triangle holder with soft, wide leather cover for comfortable hand-held play, for suspension on the music stand bar or on the combination stand sys...

main tube Ø 20 mm,fits combinations with:adapter 251, 252insert tube 164 - 169combination stand swivelling upper part 142twin adjusting ring 117, 1...

main tube Ø 20 mm,fits combinations with:adapter 251, 252insert tube 164 - 169combination stand swivelling upper part 142twin adjusting ring 117, 1...

multifunctional three-step holder/pinThe combination of holder/pin 265Z und U-shaped adjusting ring 115U results in an open sliding holder 265, tha...

holder for combination stand included with 4 location holes for maracas or handle castanets Ideal for rhythmic play with hands or mallets. Choose...

Mallet holder (mallet rake) for up to 6 pairs of mallets. With rubberised bars to avoid disturbing noises. for shaft Ø 16 mm holder width: 35 cm Te...

Permanent thumb roll, tuning, dampingFrom free sounding to muffled rhythmically articulate passages, with their adjustable tuning and damping knob ...

Twin adjusting ring for the connection of square tubes 20 mm, round tubes Ø 16 mm and round tubes Ø 20 mm. Round tubes Ø 20 mm can also be clamped ...

Adjusting ring/axial lock for round tubes Ø 20 mm Technical dataadjusting ring 20 mm fits:main tube 202 - 209 All combination stand parts are made ...

204; 40 cmmain tube Ø 20 mm, fits combinations with:adapter 251, 252insert tube 164 - 169combination stand swivelling upper part 142twin adjusting ...

Kolberg square Transverse tube 700mm square tube square 20 mm fitssliding holder 260 - 268clip-bolt adjusting ring 115, 115R, 115DU-shaped adjustin...

Technical data tip Ø 7.5 mm rubber top for cymbals 161Acymbal stacker 161, 162cymbal sizzler 256mallet holder 280, 280E, 281Itilter 253insert tube ...

Supporting bar for triangleThe new version of the well-known and proven triangle holder 242 optimises the sound of the instrument. Thanks to an inn...

insert hole Ø 7.5 mm fitstriangle holder 241, 242, 243holder/pin 260Z, 260ZA, 260ZWholder/pin with angled holder 260VL, 260VKadapter 265Ztambourine...

Transverse tube 224 features an additional insert tube Ø 10 mm and Ø 7.5 mm. The fixing screw is flexibly mounted where needed (no side noises caus...

264 inner Ø approx. 6 cmsheathed with rubber sleeveguide ring for tubular bells (only partly for use as damping ring)holder for e.g. guiro/reco-rec...

Twin adjusting ring for the connection of square tubes 20 mm, round tubes Ø 16 mm and round tubes Ø 20 mm. Round tubes Ø 20 mm can also be clamped ...

(cymbal top / shaft): 8.5 cm / 20 cm

Sturdy, light-weight folding stand136; 60 cm; for trap tray, cymbal standvertical tubeØ 16mmBase for: insert tube 164 - 169snare-drum stand upper p...

location hole Ø 16 mmFitting e.g.: Sliding holders 266, 267, 268, 265 Holders/pins 260ZG

Kolberg 260S Sliding Holder Square 20mm Ø10x100mm

Length Ø 16 mm(without cymbal stacker) 40 cm Cymbal stacker  yes Technical data tip Ø 7.5 mmrubber top for cymbals 161Acymbal stacker 161, 162cymba...

Mallet holder (mallet rake) for up to 10 pairs of mallets. With rubberised bars to avoid disturbing noises. for shaft Ø 16 mm holder width: 60 cm T...