Hardware and accesories

The Gibraltar SC-19A 8mm ABS Long Cymbal Stand Tilter Sleeve protects and seats your cymbal on the cymbal stand tilter.

The Gibraltar SC-19B 8mm ABS Short Cymbal Stand Tilter Sleeve protects and seats your cymbal on the cymbal stand tilter.Size 1(h) x 4(w) x 6(l) inc...

The Gibraltar Steel Wing Nut is one of the most common parts used on a cymbal stand or drum stand. Securely tighten a cymbal in place, or lock down...

Gibraltar Port Hole Protector Rings are designed to protect the ported hole cut into your bass drumhead.Available in 4 to 6-inch sizes, these two p...

These 1-5/8" (42mm) tension rods with 7/32" 24 threads are designed to fit with snare drums, small and medium size toms.

Make sure your drums are tuned and ready to go.These 2" (52mm) tension rods are desgined to fit with large toms and floor toms.

  Size 2.5(h) x 7.5(w) x 9(l) inches Weight 0.38 A universal mounting plate for drum modules, percussion pads, controllers, sample pads and more. ...

Gibraltar Port Hole Protector Rings are designed to protect the ported hole cut into your bass drumhead.These two piece rings snap onto both sides ...

This sleek mount attaches a cowbell to your bass drum's counter hoop. Include a 9.5mm diameter post and a U-mounting clamp for cowbells without a b...

The Gibraltar metal tension rod washers help you to keep your drum in tune.Store them in your gig bag to replace other washers that get lost.

Gibraltar SC-LRAC L-Rod Adjustable Clamp

The Gibraltar SC-1655-1 Hi Hat Stand Metal Washer fits under the felt on the hi hat cup seat.

Triple-flanged heavy-duty 2.3mm chrome drum hoops for studio and stage.These hoops provide consistent shape, tension, tuning and a clear, open soun...

The Gibraltar Steel Wing Nut is one of the most common parts used on a cymbal stand or drum stand.Securely tighten a cymbal in place, or lock down ...

The Gibraltar nylon tension rod washers help you to keep your drum in tune.Store them in your gig bag to replace other washers that get lostSize: 0...

Gibraltar's Pro Hi-Hat Clutch uses the exclusive SuperGrip clamping mechanism to securely lock your hi-hat cymbal to the pull rod, with no scarring...

Stand has an adjustable clip mount that makes it easy to hold your bongo securely in place. The legs on the stand are elliptical-shaped for a solid...

The Gibraltar SC-CFS/4 Small Cymbal Stand Felts offer a soft but supportive seat for your cymbal to rest on while you play, so that your cymbal alw...

Make sure your drums are tuned and ready to go.These 2-1/4" (58mm) tension rods are designed to fit with large floor toms and bass drums.Size 0.41(...

Attach this Mini Cymbal Stacker to any 8mm cymbal stand.Or screw to a cymbal arm thread and stack two cymbals 6" apart.

Triple-flanged heavy-duty 2.3mm chrome drum hoops for studio and stage.These hoops provide consistent shape, tension, tuning and a clear, open sound.

Gibraltar Floor Tom Legs are 21" long and are available in 3 different sizes which will work with almost every drum brand.

The Gibraltar Tom / Floor Tom Mount Bracket connects directly to a tom shell.It is designed to fit L rods or floor tom legs with diameters from 9.5...

A 6.5mm replacement hi hat pull rod.The hi hat pull rod is 23" long, with metric m6 thread and 1.00 thread pitch.

Use this rubber protector to help prevent your bass drum pedal clamp from scratching or marring your bass drum hoop.Size 0.18(h) x 4(w) x 5.25(l) i...

Make sure your drums are tuned and ready to go.These 1-3/8" (35mm) tension rods with 7/32" 24 threads are designed to fit with piccolo snare drums ...

Triple-flanged heavy-duty 2.3mm chrome drum hoops for studio and stage.

Triple Flange 14 Inch Diameter 8 hole

The Gibraltar SC-0129 6mm Key Screw locks the U joint of a double pedal connector rod to the master and slave pedal beater axle of a doube bass dru...

Gibraltar Port Hole Protector Rings are designed to protect the ported hole cut into your bass drumhead.These two piece rings snap onto both sides ...

The Gibraltar SC-PC07 Large Rubber Cymbal / Drum Stand Feet work have a leg opening dimension of 3/4" x 5/16".

The Gibraltar T Style ABS Wing Nut threads over a cymbal post and acts as a thread protector/cymbal sleeve and a wing nut all in one.Available in b...

The Gibraltar Floor Tom Rubber Feet are designed as replacement feet in the event you lose one from your floor tom leg, or may need an upgrade.Size...

The Gibraltar SC-MCW 8mm Metal Cymbal Stand Washer sits on an 8mm cymbal post to support cymbal felts and cymbals.

The Gibraltar SC-HR1 Hi Hat Stand Rubber Seat sits on the hi hat stand cup, while supporting and protecting the bottom hi hat cymbal.Being made of ...

The Gibraltar SC-HF2 Hi Hat Stand Cup Felt sits on top of a hi hat stand cup, while supporting and protecting the bottom hi hat cymbal.

The Power Rack multi clamp mounts toms, cymbals, and accessories arms to any 1.5 inch.

The Gibraltar 10.5mm Floating Floor Tom Rubber Feet are designed with a hollow tip allowing each foot to float, increasing the vibration and resona...

Make your cymbal stands do double duty! With this cymbal arm, you can clamp the Grabber to one of your existing stands and add another cymbal to yo...

The Deluxe Classic Snare Drum Throw Off is a cast metal classic style strainer with mounting hardware. Size 1.7(h) x 4(w) x 6.75(l) inches Weight 0.54

The SC-CLF/4 Hi Hat Clutch Felts fit on the threaded stem of a hi hat clutch, and protects the upper hi hat cymbal from contact with the metal nuts...

Mounts cowbells, blocks or tambourines to an adjustable floor stand which accepts most bass drum pedals. [1 pack]

Gibraltar's handy SC-4248 Speed Key installs and removes tension rods with lightning speed without ever having to remove your hand from the key.Tun...

Size: 14" Lugs: 10 For: Snare Side Material: Steel

The Gibraltar Lightweight Steel Wing Nut works with threaded cymbal tilters.

Stacks two cymbals 4" apart. Fits 8mm tilter thread. [1 pack]size 1.5(h) x 1.5(w) x 4.5(l) inches

The Gibraltar SC-4795-1 checks every box on your cowbell mount wish list. It's affordable, durable, nonslip, and most importantly, it lets you inco...

These durable plastic locks fit over tension rods to prevent drums from detuning while being played.Size 0.09(h) x 4(w) x 4(l) inchesWeight 0.02